Loading ...
Loading ...
Loading ...
PAGE: 5 / 10
Tighten the hanger bracket to the outlet box
with two mounting screws. (To reduce the
risk of fire, electric shock, or personal injury,
mount to an outlet box marked "Acceptable
for fan support" and use mounting screws
provided with the outlet box.)
Note: For sloped ceiling installation, make
sure that the chip of the hanger bracket
is toward the floor.
(For ceiling mount only)
Remove the canopy cover from the canopy.
Remove three of six screws (every
other one screw) securing the motor
collar to the top of the fan motor housing.
Attach the canopy to the housing with three
screws.
Go to Fig.9 for the next step.
(For downrod mount only)
Remove the lock pin and take off the
hanger pin.
(For downrod mount only)
Loosen the collar screws out part way.
Insert the downrod into the collar.
Slide hanger pin through holes of collar
and downrod.
(For downrod mount only)
Tighten the two collar screws. Slide lock
pin into hanger pin until it is locked into
position.
(For downrod mount only)
Thread the motor wires through the
canopy and downrod.
Turn OFF the electric circuit at the
main fuse or circuit breaker box.
(For downrod mount only)
Hang the fan on hanger bracket, and
make sure the slot of hanger ball is
snapped into the chip of hanger bracket
exactly.
Note: For sloped ceiling installation
make sure the slot of hanger ball
and the chip of hanger bracket
face down.
220104
Loading ...
Loading ...
Loading ...