Loading ...
Loading ...
Loading ...
13. Re-install the developer roller with the long shaft to the gear side.
14. Install the non-gear side developer roller bushing and screw.
BROTHER HL-L2300 SERIES TN630/660 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2015 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.uninetimaging.com
15. Fill the cartridge with new toner for use in the Brother HL-L2300 series of toner cartridges. Replace the fill plug.
16. Clean the gears, making sure that they have no toner on them. This is a good time to also check the gear shafts to make sure
there is enough grease. If the shafts appear dry, or the grease is contaminated with toner, clean the shaft and inside of the gear.
Replace the grease with white lithium grease.
Loading ...
Loading ...
Loading ...