Loading ...
Loading ...
Loading ...
FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS
CAN AND MAY LEAD TO DAMAGE TO YOUR All-Star, VOID YOUR
MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE
SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH.
Before using your All-Star, be sure to familiarize yourself with the
operating procedures.
OPERATING YOUR All-Star
Make sure the All-Star is fully charged before initial use. For charging
instructions, please follow details under CHARGING YOUR All-Star.
Stand directly behind your All-Star and place one foot on the
corresponding foot mat (as described in the diagram below). Keep
your weight on the foot which is still on the ground, otherwise the All-Star
may begin to move or vibrate, making it difficult to step on evenly with
your other foot. When you are ready, shift your weight to the foot
already placed on the All-Star and step on with your second foot
quickly and evenly (as described in the diagram below).
Find your center of gravity. If your weight is distributed correctly on the
foot mats and your center of gravity is level, you should be able to
stand on your All-Star just as if you were standing on the ground.
On average, it takes 3-5 minutes just to get comfortable standing on
your All-Star and maintaining proper balance. Having a spotter will
help you feel more secure. The All-Star is an incredibly intuitive
device; it senses even the slightest bit of motion, so having any
anxiety or reservation about stepping on may cause you to panic
and trigger unwanted movement.
When you first begin using your All-Star, the fastest way to move in your
desired direction is to focus in that direction. You will notice that just
thinking about which way you would like to go will shift your center of
gravity, and that subtle movement will propel you in that direction.
Your center of gravity determines which direction you move,
accelerate, decelerate, and come to a complete stop. As
described in the diagram below, tilt your center of gravity in the
direction you wish to move.
To turn, focus on the direction you wish to turn and stay relaxed.
As you get comfortable on the All-Star, you will notice it becomes
easier to maneuver. Remember at higher speeds, it is necessary to
shift your weight to overcome the centrifugal force.
Bend your knees if you encounter bumps or uneven surfaces, then
dismount and carry your All-Star to a safe operating surface.
Dismounting your All-Star can be one of the easiest steps, yet when
done incorrectly, may cause you to fall. To properly dismount, from
a stopped position, lift one leg up and set your foot back down on
the ground (STEPPING BACK). Then step off completely as described
in the following diagram.
WEIGHT AND SPEED LIMITATIONS
Speed and weight limits are set for your own safety. Please do not
exceed the limits listed here in the manual.
• Maximum Weight: 220 lbs
• Minimum Weight: 44 lbs
• Maximum Speed: Up to 7 mph
OPERATING RANGE
The All-Star can travel a distance up to 6 miles on a fully charged
battery in ideal conditions. The following are some of the major factors
that will affect the operating range of your All-Star.
• Terrain: Riding distance is highest when riding on a smooth, flat surface.
Riding uphill and/or on rough terrain will reduce distance significantly.
• Weight: A lighter user will have further range than a heavier user.
• Ambient temperature: Please ride and store the All-Star under
recommended temperatures, which will increase riding distance,
battery life, and overall performance of your All-Star.
• Speed and Riding Style: Maintaining a moderate and consistent
speed while riding produces maximum distance. Traveling at high
speeds for extended periods, frequent starts and stops, idling and
frequent acceleration or deceleration will decrease overall distance.
If your All-Star is unbalanced, vibrating, or not turning properly, you
can follow the below steps to calibrate it.
• First, place the All-Star on a flat, horizontal surface such as the floor
or a table. The foot mats should be even with each other and not
tilted forward or backward.Make sure the charger is not plugged
in and the board is turned off.
• Press and hold the ON/OFF button for a total of 15 seconds. The
scooter will turn on, lighting the battery indicator on the board.
• After the light flashes 5 times consecutively you may release the
ON/OFF button.
• Turn the board off and then turn the board back on. Calibration
will now be completed.
13
Move Backward Stop Move Forward
WARNING
Do not turn sharply or at high speeds to
avoid danger. Do not turn or ride quickly
along slopes, as it may cause injury.
Loading ...
Loading ...
Loading ...