Loading ...
Loading ...
Loading ...
Unit Parts
And Major
Functions
Page 8
Energy Saving Tips
•
DO NOT
set the unit to excessive temperature levels.
• While cooling, close the curtains in order to avoid direct sunlight.
• Doors and windows should be kept closed so as to keep cool or warm air in the room.
•
DO NOT
place objects near the air inlet or outlet of the unit.
• Set a timer and use the built-in SLEEP/ECONOMY mode if applicable.
• If you do not plan to use the unit for a long time, remove the batteries from the remote control.
• Clean the air filter every two weeks.
• Adjust louvers properly and avoid direct airflow toward people, animals, or plants.
The air conditioner turns to FAN-ONLY
mode from COOL or HEAT (for cooling and
heating models only) mode.
When the indoor temperature reaches the set
temperature setting, the compressor will stop
automatically, and the air conditioner shifts to
FAN-ONLY mode. The compressor will start again
when the indoor temperature rises on COOL
mode, or falls on HEAT mode, to the set point.
Droplets of water may form on the surface of
the indoor unit when cooling during relatively
high humidity (dened as higher than 80%).
Adjust the horizontal louver to the maximum air
outlet position, and select HIGH fan speed.
Heating mode (for cooling and heating
models only)
The air conditioner draws in heat from the
outdoor unit and releases it via the indoor unit
during heating. When the outdoor temperature
falls, heat drawn in by the air conditioner
decreases accordingly. At the same time, heat
loading of the air conditioner increases due to
larger dierence between indoor and outdoor
temperature. If a comfortable temperature
cannot be achieved with the air conditioner
alone, it is recommended that you use a
supplementary heating device.
Lightning or a wireless devices operating
nearby may cause the unit to malfunction.
Disconnect the unit from its power source and
then re-connect the unit with the power source
again. Push the ON/OFF button on the remote
controller to restart operations.
Closing curtains during heating also
helps to keep the heat in
Doors and windows should be kept
closed as much as possible
Inverter models will adjust their refrigeration
capacities automatically based on actual room
loads. Fan will keep running during operation.
Loading ...
Loading ...
Loading ...