Loading ...
Loading ...
Loading ...
and Button:3.
Use these buttons on the
control panel and remote to increase or decrease
the Set Temperature or Timer. Long press the
down button 3s can override the dr mode.
Temperature range: 61 ~88 or 16 ~31 .
Press the mode button to cycle
through the various modes: Cool, Dry, Fan and
Auto.
Cool Mode:
The cooling function allows the air
conditioner to cool the room and at the same time
reduces humidity. Press the MODE button to
activate the cooling function. To optimize this
function adjust the temperature by pressing the up
and down arrows and the speed by pressing the
Fan Speed button.
Dry Mode:
This function reduces the humidity of
the air to make the room more comfortable. Press
the MODE button to set the DRY mode. An
automatic function of alternating cooling cycles
and air fan is activated.
Fan Mode:
Auto Mode:
In AUTO mode the unit automatically
chooses the mode of operation (COOL, or FAN).
In this mode the temperature is set automatically
according to the room temperature (Room
temperature is determined by the temperature
conditioner is vented. Press the MODE button to
set the FAN mode. With pressing the FAN SPEED
button, the speed changes in the following
sequence: Hi, Med and Lo in FAN mode.
sensor located in the indoor unit).
7
This function only works when the air
Press the SLEEP button, all of the
display lights will turn off after a while, but the
Sleep light is always on. In SLEEP mode, the air
conditioner will automatically adjust the
temperature and fan speed to make the room
more comfortable during the night. The set
temperature will automatically raise every 30-60
minutes, and at most change six times until the
set temperature will automatically raise or
decrease based on the room temperature and the
duration of sleep.
1. When the timer is not in use,
the operation mode and the set temperature will
be displayed. Time will be displayed under the
timer setting.
Digital Display:
2.
Mode Button:
4. Sleep Button:
3
6
1
2
4
5
9
8
9 / 14
Loading ...
Loading ...
Loading ...