Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/88151918-6679163/bg1d.png)
29
EN
Troubleshooting
Fault Cause Measure
Coffee only fl ows drop-by-
drop.
Grinding fi neness is too fi ne.
Adjust the grinding fi neness more
coarse.
Clean the brewing unit.
Perform a descaling or cleaning
programme if necessary.
Coffee does not fl ow.
Water tank not fi lled or
incorrectly inserted.
Fill the water tank and make sure it is
inserted correctly.
Brewing unit is obstructed. Clean the brewing unit.
The grinder is not grinding.
The beans are not falling into
the grinder.
Tap lightly on the bean container.
Foreign objects in the grinder. Call the hotline.
Loud grinder noise Foreign objects in the grinder. Call the hotline.
Bean symbols
are fl ashing
although the bean container
is full.
Insuffi cient quantity of ground
beans in the brewing chamber
Press the
button or
button.
The
symbol is illuminated
without a reason.
There is air in the lines inside
the appliance.
Turn the valve switch 11 clockwise
until the stop until water fl ows out of
the appliance.
Clean the brewing unit if necessary.
The cleaning or descaling
process was interrupted.
The power supply was
interrupted, e.g. due to a power
outage.
The appliance performs a rinsing
program autonomously. To do
so, follow the instructions on the
appliance.
Not enough milk froth is
formed during the frothing
process.
The control dial of the
Cappuccinatore is in the wrong
position.
Adjust to the proper position.
The Cappuccinatore is dirty.
Take the Cappuccinatore apart and
clean it.
The brewing unit can no
longer be reinserted after
removal.
The brewing unit is not properly
locked.
Check whether the handle for locking
the brewing unit is correctly engaged.
The actuator is not in the
proper position.
Switch the appliance off and then on
again. Press the
and
buttons simultaneously for longer than
2 seconds. The actuator is put into
position. Then reinsert the brewing
unit and make sure it is correctly
locked into place.
The symbols for cleaning
and stand-by fl ash
alternately.
The brewing unit is missing or
not properly inserted.
Insert the brewing unit properly.
The brewing chamber is
overfi lled.
Switch off the appliance and switch
it on again using the ON/OFF button
(repeat if necessary) until standby
mode is displayed.
Continuous fl ashing of all
buttons
System error
Switch off the appliance and switch it
on again via the ON/OFF button
; if this does not solve the problem
send the appliance to the service
department.
BA_Solo_Perfect_Milk_042015.indd 29BA_Solo_Perfect_Milk_042015.indd 29 20.04.2015 21:17:1520.04.2015 21:17:15
Loading ...
Loading ...
Loading ...