Loading ...
Loading ...
Loading ...
4
STEP 3: Using the Own Zone™ Headphones
1. Make sure that the transmitter has been set up and is turned ON. If the transmitter is
being powered by the TV via included micro-USB cable, simply turn on the TV and the
transmitter will turn on automatically. If you are using a separate power source, you will
have to manually power on the transmitter.
2. Power on the headphones. Before first use, make sure that the headphones are fully
charged. When ready, push and hold the power button for a second to turn on the
OwnZone™ headphones. The headphones should automatically pair to the transmitter.
If they do not, see the PAIRING YOUR OWN ZONE™ HEADPHONES (page 8) section
in this manual.
Note: If the transmitter is connected via AUX cable, no sound will output through the
TV. In this case, the volume of the headphones is also dependent on the volume of the
TV. Make sure both the TV volume and headphones volume are adjusted using your TV
remote. If you are using an Optical or RCA cables and want to turn off the sound
coming through the TV, use your TV remote to mute the TV, and sound will only come
through the headphones.
3. Adjust the volume. To adjust the volume, push the +/- buttons (located on the right
headphone) to the desired volume. When connected using the AUX cable, you will need
to adjust the volume using your TV remote.
POWER BUTTON
9
SYSTEM RESET INSTRUCTIONS
In the rare event of a malfunction, you may need to perform a system reset. In the
event that a reset is needed, follow these steps:
1. Turn on the power of the transmitter base.
2. Turn on the power of the headphones.
3. Press and hold the Scan buttons on the transmitter base and the headphones at
the same time. The LED indicator lights will flash BLUE.
4. When you hear a long beep, let go of both buttons. The system has now been reset.
(RIGHT EAR)
(LEFT EAR)
LED
POWER BUTTON
TRANSMITTER
POWER BUTTON
SCAN BUTTON
SCAN BUTTON
POWER BUTTON
Loading ...
Loading ...
Loading ...