Pyle PDWRBT56BL User Manual

Loading ...

2016 Escalade Sports

For Customer Service Call 1-888-996-2729

LED PUCK BATTERY CHANGE INSTRUCTION

STEP ONE:

Remove screws and back

cap from LED Puck using Small

Phillips Screwdriver (not provided).

STEP TWO:

Remove CR2016 Lithium

Battery 3V from LED Puck.

STEP THREE:

Insert new CR2016 Lithium Battery 3V

into LED Puck.

STEP FOUR:

Install back cap and secure screws with Phillps Screwdriver

(not provided).

Positive “+”

on bottom

side

LED STRIKER BATTERY CHARGE INSTRUCTION

NOTE:

Make sure the on/off

switch on the back

cap properly aligns

and fits into its slot in

the LED puck during

reassembly

IF BATTERY HOLDER BRACKET

MOVES, RE-INSTALL IT TO LED

PUCK AS SHOWN IN DIAGRAM.

USB Port

LED INDICATOR WILL LIGHT-UP DURING CHARGING AND

WILL TURN OFF WHEN ITS FULLY CHARGED.

Helpful Hint:

The LED puck battery will last approximately 7 hours of continuous play. The puck battery is not

rechargeable. Be sure to turn the switch to the “OFF” position when not in use to conserve your

battery life.

Helpful Hint:

The LED strikers each will require about 4 hours to fully charge up and will last approximately

7 hours of continuous play time. Be sure to turn the switch to the “OFF” position when not in use.

Loading ...

Pyle PDWRBT56BL Bluetooth Indoor Outdoor Speakers Pair - 500 Watt Dual Waterproof 5.25” 2-Way Full Range Speaker System w/ 1/2” High Compliance Polymer Tweeter - Home, Boat, Marine, Deck, Patio, Poolside -