Loading ...
Loading ...
Loading ...
www.NutrichefKitchen.com
4
Plastic Bottom
The plastic bottom are attached underneath the brew kettle, covering the
electronic components and the pump. This bottom can be removed by
unscrewing the screws. This will give you access to the pump for maintenance
and cleaning. The feet assure a enough space to diuse the heat from the
inside of base and protect the electronic device.
Glass Lid
Place the lid on the brew kettle during mashing in order to retain the heat
within the mash. It is visible to watch inside of the kettle well. With the silicon
hose connected to the riser pipe, the pump can be used to circulate the wort
during mashing and lautering.
The lid has an extra hole intended to be used in conjunction with a
thermometer. This allows for measuring the temperature in the mash at the
top of the kettle as the temperature here sometimes be dierent from that
on the bottom where the built-in temperature sensor is located.
#2 Malt basket, #3 lifting handle and #4 lter screen:
Place the malt basket with the lter screen inside the brew kettle before
adding water and malt.
Male and female CamLock ttings
CamLock levers. CamLock ttings.
CamLock closing procedure.
Reverse to release.
Glass lid
Filter screen bottom
in malt basket
Plastic Bottom
Loading ...
Loading ...
Loading ...