INSTRUCTION FOR OIL DRAIN TANK /OIL CHANGER
NO.
Part name
Quantity
1
Funnel
1pcs
2
Ball valve
1pcs
3
Pole of funnel
1pcs
4
Quick connector
1pcs
5
Ball valve
1pcs
6
Tee joint
1pcs
7
Safety valve
1pcs
8
Aluminium pipe
connector
1pcs
9
Tank
1pcs
10
Oil drain tube
1pcs
11
Ball valve
1pcs
12
Screw
1pcs
13
Water pipe elbow
1pcs
14
Plug
2pcs
15
Spacer
2pcs
16
Wheel
2pcs
17
Oil level pipe
1pcs
Technical Parameters
Vacuum degree: negative 0-0.8PA Working pressure: 1-3kg
Capacity: 80L Medium: oil, engine oil, gear oil
Operating Instructions
Oil drain tank for collecting all kinds of trashy oil from auto, agriculture mechanism, etc.
1.Let the auto rise to up,then push oil drain tank under the automobile engine;and remove the oil discharge screw
2.Open the oil valve of oil basin,at the same time open the inlet valve at the top of the oil tank;then waste oil into
the storage tank from the oil basin.
Waste oil discharged from the storage tank.
1.Open the ball valve that lead to the hook,and use the hook to hook the bin
2.Use the connector connected to compressed air quickly at the top of the equipment;close the oil valve, open
compressed air switch(Note:when the safety valve begin to exhaust,then the compressed air switch can be closed）；
then the waste oil is discharged from the hook.
Maintenance Instructions
1)Regularly check whether the equipment has leakage phenomenon, if yes,it should be make a maintenance
immediately ;
2)Always check whether the hose connection is sealed;
3)In order to avoid corrosion , the waste oil in storage tank should not be stored for a long time;
4)The equipment surface should be wiped clean commonly by towel or cloth, keep equipment clean, after use it,
please put it in the shade to avoid exposure to sunlight.
Warning
1)After the training of qualified personnel can use the device;
2)Do not smoking near the equipment;
