Loading ...
Loading ...
Loading ...
MOUNTING INSTRUCTIONS
You must next select which side of the towel rail is needed to be wired in. The heated
towel rail within this box has two wiring options (left or right hand). The location of
existing wiring through or on the wall will dictate which side you will use.
For Left hand wiring, connect the power cable from Point A.
For Right hand wiring, connect the power cable from Point B.
For the side that you do not use, insert the termination plug into the power cable and
secure with the cap screw fitting.
Installing your Towel Rail
Select desired position to mount towel rail with at least 300mm clearance from all
permanent objects in surrounding area and the bottom rung must be 600mm above the
floor. The Ladder Towel Rail should be installed in accordance to local governing AS/NZS
regulations. The Goldair Heated Towel Rail can only be mounted 1 way. Your towel rail is
mounted by legs with a screw on each of the 4 legs as indicated in Fig1. below.
A
B
Fig1.
CONCEALED OR EXPOSED WIRING
First, select which method of cord entry your installation
situation requires – exposed or concealed. (please see images
below as an indication to the differences)
The accessory pack contains a set of 4 legs for your heated towel
rail – one of which is a universal leg (used for both concealed and
exposed installations)
ExposedConcealed
Loading ...
Loading ...
Loading ...