Loading ...
Loading ...
Loading ...
34
OPERATION
INSPECTING BURNERS
Checkpilotamepatternandburneramepatternsoften.
PILOT FLAME PATTERN
Figure20showsacorrectpilotamepattern.Figure21showsanincorrectpilotamepattern.The
incorrectpilotameisnottouchingthethermocouple.Thiswillcausethethermocoupletocool.When
thethermocouplecools,the�replacewillshutdown.
Ifpilotamepatternisincorrect,asshowninFigure21.
•Turn�replaceoff(seeToTurnOffGastoAppliance,page27.
• See Troubleshooting, page 37.
Note:Thepilotameonnaturalgasunitswillhaveaslightcurve,butameshouldbeblueandhave
no yellow or orange color.
WARNING: If yellow tipping occurs, your heater could produce increased levels of carbon
monoxide.Ifburneramepatternshowsyellowtipping,followinstructionsatbottomofthis
page.
WARNING:Donotallowfanstoblowdirectlyintothe�replace.Avoidanydraftsthatalterburner
amepatterns.
WARNING: Do not use a blower insert, heat exchanger insert or other accessory not approved for
use with this heater.
Notice:Donotmistakeorangeameswithyellowtipping.Dirtorother�neparticlesentertheheater
andburncausingbriefpatchesoforangeame.
Fig. 20 - Correct Pilot Flame Pattern Fig. 21 - Incorrect Pilot Flame Pattern
LP PILOT
NG PILOT
LP PILOT
NG PILOT
Loading ...
Loading ...
Loading ...