Pyle PKSCRD308 Portable Bluetooth Live Broadcast Sound Card Pro Audio Interface DJ mixer Condenser w/Microphone Set, for Streaming podcasts Studio, Recording PC, Gaming, Phone, w/FX, Ambient Sounds -

User Manual - Page 3

For PKSCRD308.

PDF File Manual, 4 pages, Read Online | Download pdf file

PKSCRD308 photo
Loading ...
Loading ...
AUX
Accompaniment
music
Broadcasting
or
Notice:
The sensitivity of cartridge is very high. Don’t drop, hit or apply strong shock
to it. To maintain the sensitivity and quality of sound reproduction, avoid
exposing it to moisture and extreme temperatures.
CONNECTIONS
Notice:
When you use PC for live broadcasting, please use the Type-C to USB data
cable to connect PC with POWER OTG jack only. POWER OTG also can be
used for smart phone live broadcasting too.
LINE IN:
Connect with any kinds of music input. e.g. MP3, Smartphone, Computer, etc.
When you don't hear any sound from microphone, please check the "VOLUME"
if turned ON or not? Or check "SOLO" if ON or not.
You will not hear sound from your microphone when the "SOLO" is ON.
27. KTV: Karaoke mode. Your voice will become nice for karaoke.
28. ORIGINAL VOICE: Keep your original voice, no ECHO, TREBLE, ALTO, BASS,
eect in your voice.
29. PC LIVE: When you use PC for live broadcasting with others, please press
this button. Then you will not hear echo noise during live streaming.
30. SOLO: When you use smart phone for singing on live, some software may
cause some echo noise. Please press this button, then all audience will not
hear echo noise during live streaming. You will also not hear the voice of
yourself from the monitor earphone/speaker too.
31. AMBIENT MUSIC and CHARACTER SOUND.
32. MONITOR VOLUME: To control the output volume of the monitor
earphone or speaker.
Condenser Microphone
How to install and use of the condenser microphone?
1. Screw the microphone holder to the tripod stand.
2. Screw the condenser microphone to the microphone holder.
Stand up the microphone as picture.
3. Plug the XLR connector of cable to the bottom XLR of the microphone.
4. Plug the 3.5mm connector to the “MIC 2” input jack of sound card
PKSCRD308.
5. Put the wind screen sponge on the head of microphone.
Then the microphone is ready be used. You could adjust the angle of the
stand.
www.PyleUSA.com
4
www.PyleUSA.com
5
This is a professional condenser microphone,
which adopts the exacting complete electronic
circuit control and large diaphragm capsule, the
microphone with a good pickup pattern, high
output, low self-noise, and the accurate reproduction
of even the most subtle sound, suitable especially
for studios, recording studios, broadcasting stations,
stage performances and computer.
Absolutely fulll the requirement of high quality for
broadcasting and recording.
Loading ...