Loading ...
Loading ...
Loading ...
Surface Cooking (cont'd)
Using Power Element (some models)
The "Power Element" feature uses a higher wattage surface radiant element
which can bring food items to boil much quicker. The left front radiant element
willbeclearlymarkedifthisfeatureisavailableonyourrange(SeeFig. 1).If _,_ _.
equipped with the "Power Element" feature, place the cookware to boil on the
left front surface element and follow the instructions "To Operate a Single
Radiant Element" in the Settings Surface Controls section. Fig. 1
Oven Control Functions
READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. Forsatisfactory use ofyour oven, become familiar with
the various pad functions of the oven as described below.
CLOCK SET COOK TIME
PAD-- Used PAD-- Used to
to set the enter the length of
time of day. the baking time.
OVEN INTERIOR _ \
LIGHT PAD-- Used to ........ \..
turn oven interior light _ \
ON or OFF. This pad is _ \
also used to activate _.::.._--_\ • _•
the
Cooktop Lockout
feature (some models) 0 S'_'_ Co_
SELECT SELF-CLEAN
PAD-- Used to select
the Self-Cleaning S__ ri_
cycle. A 2, 3 or 4 hour
Self-Clean time may be
selected.
UP and DOWN ARROW PADS Used along BAKE PAD--Used
with the function pads to select oven to select the bake
temperature, cook time, start time (when function.
programming an automatic start time), time of /
FEATURE INDICATOR
day, clean time and minute timer.
/
LIGHTS-- These light to
snow wnicn feature is <
use.
• •/ BROIL PAD Used to
selec[ the /arlaole DrOll
_e function
• _LI'_!_b %_ WARM & HOLD PAD--
• #_ _ = _ Used to set the Warm &
4old feature.
J
TIMER SET/OFF PAD-- DELAY START
Used to set or cancel the PAD-- Used to set
minute timer. The minute the desired start
timer does not start or stop time for baking &
cooking. Also, Self-Clean. May be
TIMER SET/OFF pad is used with COOK
used to set the Continuous TIME to program a
Bake feature, deIayed bake cycIe.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* -- The "OVEN" light
will glow each time the oven turns on to maintain the set oven
temperature. The "PREHEAT" light will gIow when the oven is first
set to operate, or if the desired temperature is reset higher than the
actual oven temperature. The "DOOR LOCKED" light will flash
when the oven door locks and unlocks or when using the Self-
Clean cycle or the oven door lockout is activated. The indicator light
wilI gIow constantly after the door locks. COOKTOP LOCKED light
wilt gIow when the cooktop has been locked (some models).
STOP/CLEAR PAD--
Used to clear any
function previously
entered except the time
of day and minute timer.
Press STOP/CLEAR to
stop cooking. Also the
STOP/CLEAR pad is
used to activate oven
door lockout setting.
*Note: The OVEN indicator light on the electronic display Temperature conversion
wi!l turnON and OFF when using the Bake feature and The electronic oven control is set to operate in °F
during preheat. This is norma! and indicates that the oven is (Fahrenheit) when shipped from the factory. The oven can be
cycling to maintain the Selected baking temperature. When programmed for any temperature from 170°F to 550°F (77°C
the preheat indicator light turns OEE,your ovenis ready, to287°c).
For a silent control panel
When choosing a function, a beep will be heard each time a
pad is pressed. If desired, the control can be programmed
for silent operation. Press and hold @. After 7 seconds,
the control will beep once. This will block the controls from
sounding when a pad is pressed. To return the sound, press
and hold @ again for 7 seconds until the control beeps
once.
To change the temperature to °C (Celsius) or from °C to
°F (control should not be in a Bake or Clean mode):
1. Press B,o_.... appears in the display.
2. Press and hold the A until "HI" appears in the
display.
3. Press and hold ",o"until °F or °C appears in the display.
4. Press the A or V to change °F to °C or °C to °F.
5. Press any control pad to return to normal operating
mode.
12
Loading ...
Loading ...
Loading ...