Loading ...
Operation Guide 5611
E-19
Adjusting the Digital Time and Date Settings
Use the procedure below to adjust the digital time and date settings.
To configure the digital time and date settings
1. In the Timekeeping Mode, hold down A until the
flashing SET indicator disappears from the display
and the currently selected city code appears on the
display.
E-18
To change the Daylight Saving Time (summer time) setting
1. In the Timekeeping Mode, hold down A until the
flashing SET indicator disappears from the display
and the currently selected city code appears on the
display.
2. Press C to display the DST setting mode.
3. Press D or B to toggle between Daylight Saving
Time (ON) and Standard Time (OFF).
x Note that you cannot switch between daylight saving
time and standard time while UTC is selected as your
Home City.
4. After the setting is the way you want, press A to
return to the Timekeeping Mode.
x The DST indicator appears to indicate that Daylight
Saving Time is turned on.
DST indicator
E-17
Note
x After you specify a city code, the watch will use UTC* offsets in the World Time
Mode to calculate the current time for other time zones based on the current time
in your Home City.
* Coordinated Universal Time, the world-wide scientific standard of timekeeping.
The reference point for UTC is Greenwich, England.
E-16
Configuring Home City Settings
There are two Home City settings: actually selecting the Home City, and selecting
either standard time or daylight saving time (DST).
To configure Home City settings
1. In the Timekeeping Mode, hold down A until the
flashing SET indicator disappears from the display
and the currently selected city code appears on the
display.
x This indicates the Home City setting mode.
2. Use D (+) and B (–) to scroll through city codes until
the one you want is displayed.
x For details about city codes, see the “City Code
Table” at the back of this manual.
3. After the setting is the way you want, press A to
return to the Timekeeping Mode.
City Code
E-15
Timekeeping
Use the Timekeeping Mode to set and view the current time and date.
Day of week
Second
Minute
Each time you press D, the display will change
as follows.
Hour
Month-Day Hour : Minute
PM indicator
D
x To view the Home City name (English), press A.
E-14
2. Pressing B and C at the same time again will cause the hands to return to their
normal positions (normal timekeeping).
Note
x Watch button functions are the same regardless of whether the hands are moved
out of the way or at their normal positions.
x Changing to another mode will cause the hands to move back to their normal
positions.
x The hands also will move back to their normal positions automatically if no
operation is performed for about one hour.
E-13
1. Press B and C at the same time.
x This will cause the hour and minute hands to move to a location where they do
not block your view of the digital display.
Example: When the current time is 8:30
Flashes while the hands are moved out of the way.
E-12
General Functions (All Modes)
The functions and operations described in this section can be used in all modes.
Auto Return
If you do not perform any operation for about two or three minutes while configuring
settings (setting flashing on the digital display) in any mode, the watch will exit the
setting operation and return to normal display.
Scrolling
The B and D are used on the setting mode to scroll through data on the display.
In most cases, holding down these buttons during a scroll operation scrolls through
the data at high speed.
Moving the Hands Out of the Way for Better Viewing
You can use the procedure below to temporarily move the hour and minute hands
out of the way to better view what is on the display.
x This operation can be performed in any mode. In the case of a setting mode
(setting flashing on the screen), the hands will move out of the way automatically,
even if you do not perform the below operation.
E-11
Countdown Timer Mode
C
Alarm Mode Stopwatch Mode
C
C
x To return to the Timekeeping Mode from any other mode, hold down C for at
least two seconds.
E-10
Selecting a Mode
x Press C to cycle between the modes as shown below.
Timekeeping Mode
World Time Mode
C C
Loading ...
Loading ...
Loading ...