Loading ...
Loading ...
Loading ...
12
EN EN
13
NOTICE
FCC Statement
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
Warning:
Changes or modications not
expressly approved by the party responsible for
compliance could void the user's authority to
operate the equipment.
Note:
This equipment has been tested
and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no guarantee
that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception,
which can be determined by turning the
equipment off and on, the user is encouraged
to try to correct the interference by one or
more of the following measures: (1) Reorient or
relocate the receiving antenna. (2) Increase the
separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected. (4) Consult the dealer or an
experienced radio/TV technician for help.
FCC Radio Frequency Exposure
Statement
The device has been evaluated to meet general
RF exposure requirements. The device can be
used in xed/mobile exposure condition. The
min separation distance is 20cm.
Notice:
Shielded cablesAll connections to
other computing devices must be made using
shielded cables to maintain compliance with
FCC regulations.
The following importer is the responsible party
Company Name: POWER MOBILE LIFE, LLC
Address: 400 108th Ave NE Ste 400, Bellevue,
WA 98004-5541
Telephone: 1-800-988-7973
This product complies with the radio
interference requirements of the
European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that
this device is in compliance with the essential
requirements and other relevant provisions of
Directive 2014/53/EU. For the declaration of
conformity, visit https://uk.eufylife.com/
This product can be used across EU member
states.
Due to the used enclosure material, the product
shall only be connected to a USB Interface of
version 2.0 or higher.
The adapter shall be installed near the
equipment and shall be easily accessible.
Do not use the Device in the environment at
too high or too low temperature, never expose
the Device under strong sunshine or too wet
environment.
The suitable temperature for HomeBase 2 and
accessories is -10°C-45°C.
The suitable temperature for eufyCam 2 Pro
and accessories is -20°C-50°C.
When charging, please place the device in an
environment that has a normal room
temperature and good ventilation.
It is recommended to charge the device in an
environment with a temperature that ranges
from 5°C~25°C.
Please ensure to use only the charger offered by
the manufacturer. Using unauthorized charger
may cause danger and violate the authorization
of the device and the guarantee article.
This charger is for indoor use only. The
charger type is ASSA67W-120200/KA
2401A-1202000DE, output voltage/current is
12Vdc/2A. The plug considered as disconnect
device of adapter.
RF exposure information: The Maximum
Permissible Exposure (MPE) level has been
calculated based on a distance of d=20 cm
between the device and the human body.
To maintain compliance with RF exposure
requirement, use product that maintain a 20cm
distance between the device and human body.
CAUTION RISK OF EXPLOSION IF BATTERY
IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING
TO THE INSTRUCTIONS.
SUB-1G Frequency range (for T8010X):
866~866.8MHz; SUB-1G Max Output Power
(forT8010X):5.492dBm (ERIP)
Wi-Fi Operating Frequency
Range:2412~2472MHz; Wi-Fi Max Output
Power:17.13dBm (ERIP for T8010), 17.47dBm
(ERIP for T8140)
The following importer is the responsible party
(contact for EU matters only)
Anker Innovations Deutschland GmbH I Georg-
Muche-Strasse 3, 80807 Munich, Germany
This product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This symbol means the product must not be
discarded as household waste, and should
be delivered to an appropriate collection
facility for recycling. Proper disposal and
recycling helps protect natural resources,
human health and the environment.
For more information on disposal and
recycling of this product, contact your
local municipality, disposal service, or the
shop where you bought this product.
IC Statement
This device complies with Industry Canada
licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference,
including interference that may cause undesired
operation of the device."
Le présent appareil est conforme aux CNR
d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est
autorisée aux deux conditions suivantes:
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout
brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le
fonctionnement."
This Class B digital apparatus complies with
Canadian ICES-003.
Cet appareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
IC RF Statement:
When using the product, maintain a distance of
20cm from the body to ensure compliance with
RF exposure requirements.
Lors de l'utilisation du produit, maintenez
une distance de 20 cm du corps an de
vous conformer aux exigences en matière
d'exposition RF.
This product complies with the radio
interference requirements of the United
Kingdom.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that
the product type T8851 is in compliance with
Radio Equipment Regulations 2017. The full text
of the UK declaration of conformity is available
at the following internet address: https://
uk.eufylife.com
Anker Technology (UK) Ltd I Suite B, Fairgate
House, 205 Kings Road, Tyseley, Birmingham, B11
2AA, United Kingdom
Loading ...
Loading ...
Loading ...