Ancona AN1510 User Manual

Loading ...

— 17 —

Maintenance

Replacing the Light Pucks

IMPORTANT:

ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY AT THE MAIN PANEL BEFORE CARRYING OUT ANY OPERATION

ON THE APPLIANCE.

Make sure the range hood is unplugged or turn OFF

breaker.

Remove lters and easy clean panel, push the

spring, pull out the LED puck and unplug it.

CAUTION: PUCK MAY BE HOT, PLEASE

TAKE OUT THE PUCK WHEN THE PUCK IS

COMPLETELY COOL!

Replace with a 10.2 Volt, 2.5-Watt max, LED lights.

Plug in new puck and push back into light panel.

Turn ON breaker and range hood to test for

operation.

Cleaning Filters

IMPORTANT: Drain oil from bafﬂes, spacers, ﬁlters, oil tunnels, oil containers before oil and residue overﬂow!

• Removeallbafes,spacers,lters,greasetray,andoilcontainersanddiscardoilandresidue.

• Washwithwarmsoapywater.NOTE:Stainlesssteelbafes,spacersandoiltunnelaretoprackdishwashersafe.

• Dry thoroughly before replacing and follow directions for installation in reverse.

• Filters should be cleaned after every 30 hours of use.

• Should lters wear out due to age and prolonged use, replace with a new lter.

Loading ...

Ancona AN1510 36 Inch Black and Stainless Steel Convertible Chimney Style Wall Mount Hood