Loading ...
Loading ...
Loading ...
• Use the wire included in the kit or a small paper
clip to free the foreign materials clogging or
restricting the nozzle.
Parts in the O-Ring Kit include:
• 1 o-ring, red, (p/n B2726) for the end of the spray
gun connection between gun and nozzle extension.
Insert wire into nozzle and turn back
and forth to clear obstruction.
Remove additional debris by back flushing water
supply through nozzle extension. Back flush
between 30 to 60 seconds. Turn nozzle extension
to stream spray and move nozzle from low to high
pressure while flushing.
• Reinstall nozzle into nozzle extension. Do Not
overtighten.
• Reconnect the water supply, turn ON the water,
and start the engine.
• Reconnect nozzle extension to spray gun.
• Test the pressure washer by operating with nozzle
in the high and the low pressure positions.
O-Ring Maintenance
Through the normal operation of your pressure
washer, the o-rings keep the connections of the hoses
and gun tight and leak-free. They may become worn
or damaged with use.
Provided with your pressure washer is an O-Ring
Maintenance Kit which includes replacement o-rings,
rubber washer and water inlet filter. Refer to the
instruction sheet provided in the kit to service your
unit's o-rings. Note that not all of the parts in the kit
will be used on your unit.
O
1 o-ring, yellow, (p/n B2264) for the end of the
high pressure hose.
NOTE: The above two o-rings are close in size.
Please match carefully to assure proper o-ring usage.
• 1 rubber washer, (p/n B2385) for the inside of the
garden hose connector.
• 1 water inlet screen (p/n B2384) for the garden
hose connector.
To remove a worn or damaged O-Ring:
• Use a small flathead screwdriver to get underneath
the o-ring and pry it off.
12
Loading ...
Loading ...
Loading ...