Loading ...
Loading ...
Loading ...
_I,CAUTION: Do not operate this mower without the discharge guard or an entire
approved grass catcher in place. These guards are for your protection and are required
by the American National Standards Institute and Consumer Products Safety Commis-
sion.
_i'LCAUTION: Disconnect spark plug wire from spark plug and place wire where it
cannot come in contact with plug.
HOWTO SET UP YOUR LAWN MOWER
UNFOLD HANDLE
IMPORTANT: Unfold handle carefully so
as not to pinch or damage control cables.
• Raise handles until lower handle section
locks into place in operating position.
• Raise upper handle section into place
on lower handle, remove protective
padding and tighten both handle knobs.
• Remove handle padding holding
operator presence control bar to upper
handle.
• Your lawn mower handle can be
adjusted for your mowing comfort.
Refer to "ADJUST HANDLE" in the
Service and Adjustments section of this
manual.
control bar
Lift L
Mowing
position
Lower handle
FOR HIGH WHEEL MOWERS ONLY -
INSTALL REAR WHEELS
Some high wheel models require washers
which will be provided in a parts bag. If
provided, install washers on the axle first
as shown.
• Install one (1) rear wheel on the axle of
rear wheel adjuster.
• Install 3/8-16 Iocknut and tighten
securely.
• Repeat procedure for other rear wheel.
Wheel Axle
assembly
Iocknut
Wave
Washers
NOTE: For shipDng purposes, the rear
wheels on your lawn mower may not be
adjusted to the same position as the front
wheels. Before operating mower adjust all
wheels to the same cutting height.
Loading ...
Loading ...
Loading ...