EGO PAD5000 POWER+ Nexus Escape 400W Inverter

OPERATOR’S MANUAL - Page 18

For PAD5000. Also, The document are for others EGO models: PAD5000-FC*

PDF File Manual, 76 pages, Read Online | Download pdf file

PAD5000 photo
Loading ...
Loading ...
Loading ...
56-VOLT POWER INVERTER18
OVER TEMPERATURE PROTECTION
If the battery or inverter temperature exceeds 158°F (70°C) during operation, the
temperature-protection circuit will shut off the unit in 1 minute to protect from
overheating damage. The power button indicator will glow solid red for 1 minute. Allow
the unit to cool until its temperature drops below 152°F (67°C) before restarting.
LOW BATTERY PACK CHARGE PROTECTION
The inverter automatically shuts down 1 minute after the battery pack charge reached
a low level.
Charge the battery pack.
OVERLOAD OR SHORT CIRCUIT PROTECTION
When the connected AC device draws more than the rated power of the port, the
inverter LED indicator will flash red for 1 minute at 1 flash every 0.5 seconds. Then the
inverter will automatically shut down.
Disconnect the AC device.
USING WITH EXTERNAL DEVICES
When a charged battery pack is installed, the power inverter converts DC electricity to
120V AC household power and/or USB-A (5/9/12V, up to 18 W) or USB-C output port 1
(5/9/12/15/20V, up to 18 W) or USB-C input/output port 2 (5/9/12/15/20V, up to 100 W)
supply power, allowing the user to charge and power a variety of devices.
Additionally the power inverter can charge the EGO battery when a USB PD charger is
connected to the USB-C input/output port 2 (5/9/12/15/20V, up to 100 W).
NOTE: The inverter may not be compatible for use with some USB PD chargers.
WARNING: Risk of electric shock. When using a grounded appliance, the product
will not provide an electrical path to earth ground. Do not power devices with damaged
or frayed power cords.
WARNING: To avoid a risk of electric shock, do not insert a nail, wire, etc. into
the AC output port.
WARNING: Risk of electric shock and risk of fire. This device is not to be stored
or kept in a vehicle.
1. Insert a battery pack into the power inverter.
Loading ...
Loading ...
Loading ...