Loading ...
Loading ...
Loading ...
4
ENGLISH
Switch On and Off
With all connections made, and the Bowers &
Wilkins Home app installed on your mobile device,
your Formation Duo are ready to be set up.
Formation Duo have no mains power switch and,
following a short start-up routine, will be operational
as soon as they are connected to mains power. They
will play an audio prompt when their startup routine
is complete.
When Formation Duo, that have not been previously
used, are rst switched on they will automatically
enter setup mode to enable their connection to your
home network and to any other available Formation
devices. Setup mode is indicated by a slow orange
pulse illumination of the speaker’s Form buttons
. Formation Duo will also appear in the Bowers
& Wilkins Home app as available for setup, either
on the initial app page, or after selecting ‘Add
Formation product’ from the app Settings page.
Your Formation Duo manage their operational state
and power consumption entirely automatically and
will switch to a power saving mode after twenty
minutes of inactivity. There is no need ever to switch
off your Formation Duo, however should you wish to
do so, simply disconnected them from mains power.
Your Formation Duo will retain their settings without
mains power.
You can restart each Formation Duo by a short
press and release of the reset buttons located on
their rear panels Pressing the button will switch the
Formation Duo off and on again. All settings will be
retained when your Formation Duo restart. You can
also restart your Formation Duo via the Bowers &
Wilkins Home app Settings page. The reset button is
illustrated in Diagram 3.
If you wish to to reset your Formation Duo to their
default settings, press and hold each reset button
for ve seconds. On restart, your Formation Duo will
enter setup mode. All settings will be deleted when
your Formation Duo reset. You can also reset your
Formation Duo via the Bowers & Wilkins Home app
Settings menu.
Network Setup
• With your Formation Duo in setup mode, with their
Form button
illumination pulsing slowly orange,
launch the Bowers & Wilkins Home app on your
iOS or Android device. The app will guide you with
prompts though the setup process.
Note: Formation Duo employ a Bluetooth
connection to the device running the Bowers
& Wilkins Home app during the setup process.
Bluetooth signals have a relatively short range
and can be interrupted by room boundaries, so
we recommend that your Formation Duo and
Bowers & Wilkins Home app device remain in
close proximity during the setup process.
• The Bowers & Wilkins Home app will rst search
for Formation products in setup mode and display
a screen inviting the selection of one. Tap to select
your Formation Duo. If you have already set up a
Formation product and are adding an additional
one, select ‘Add Formation product’ from the app
Settings menu.
Diagram 3
Reset button
• The Bowers & Wilkins Home app will next invite
you to name the “space” in which your Formation
Duo are to be used. A list of default space names
is provided but you can also create your own.
When you have selected, or created, a space
name, the app will ask you to touch the Form
button
on the front of one Formation Duo to
conrm the selection.
• If a wireless network connection for your
Formation Duo is to be used, the next setup stage
will connect your Formation Duo to your home
WiFi network. The app will ask you to conrm
the correct WiFi network and ask you to input its
password. Alternatively, if your Formation Duo
are connected to your network router using an
Ethernet cable, this stage of the setup process will
be bypassed.
Note: If you already have other Formation
products connected to your WiFi network,
Formation Duo setup will not require you to
input the WiFi password.
• With WiFi network conguration, and space
selection complete, your Formation Duo are ready
for use. Your Formation Duo will play an audio
prompt to conrm successful setup.
Bluetooth Setup
You can connect your Formation Duo to a Bluetooth
enabled audio source device, such as a smartphone,
to play audio over Bluetooth. Your Formation Duo
must rst be “paired” with the Bluetooth audio
source device.
Once you have completed the Formation Duo
network setup, open the Bowers & Wilkins Home
app Settings page, and select the Formation Space
that you wish to pair a Bluetooth device with. Next
select ‘+ Pair a new device’ from the Bluetooth
menu and follow the app instructions to complete
pairing. Your Formation Duo will play an audio
prompt when pairing is complete and their Space will
become available to the paired Bluetooth device for
audio playback.
Note: Up to eight Bluetooth devices can be
simultaneously paired with each Formation
space, however devices will not connect and
play to paired spaces automatically.
Loading ...
Loading ...
Loading ...