Loading ...
Loading ...
Loading ...
- 8 -
4.If the machine cannot strip the wire, there may be several reasons:
①.The diameter of the stripped wire is too small.
②.The center of the blade is not in line with the center of the roller(the
adjustment method is as follows). We need to remove the side mask and
mask between the machine and reducer first. Adjusting the center
adjustment block to adjust the blade shaft to the left or right by the wrench.
Make the blade center in line with the center of the rolling shaft.
③
.The blade is not sharp（Grind it with an oilstone to make it sharp）.
Loading ...
Loading ...
Loading ...