Loading ...
Loading ...
Loading ...
14
1. Draw out the lower and upper basket, load the dishes and push them back.
It is commended to load the lower basket first, then the upper one.
2. Pour in the detergent.
3. Insert the plug into the socket. The power supply refer to last page ”Product fiche”.
Make sure that the water supply is turned on to full pressure.
4. Close the door, press the Power button to switch on the machine.
5. Press the “ ” or “ ” button to select a program, the corresponding program
will be displayed on the screen.
6. Press the Start/Pause button, the dishwasher will start its cycle.
A wash cycle can only be changed if it has been running for a short time otherwise,
the detergent may have already been released and the dishwasher may have already
drained the wash water. If this is the case, the dishwasher needs to be reset and the
detergent dispenser must be refilled. To reset the dishwasher, follow the
instructions below:
Starting A Cycle Wash
Changing The Program Mid-cycle
AS/NZS 2007.1:
test in accordance with AS/NZS 2007.1.
This program is the test cycle. The information for comparability
NOTE:
Program
Running
Time(min)
Energy
( h)
Water
(L)
Description
Of Cycle
Rinse
Aid
Detergent
Pre/Main
Wash(45℃)
Rinse(55℃)
Rinse(55℃)
30 0.7 11
20g
Prewash
15
0.02
4
Soak
Rapid
90 1.15 12.5
Wash(65℃)
Rinse
Rinse(65℃)
Drying
90 Min
33.75g
(1 piece)
Wk
Loading ...
Loading ...
Loading ...