Loading ...
Loading ...
Loading ...
Phone Finder
You can use phone finder to trigger a tone on
the phone to make it easy to find. The tone is
forced to sound even if the phone is in vibrate
mode.
Important!
●
Do not use this function in areas where
phone call tones are restricted.
●
The tone sounds at a high volume. Do
not use this function when listening to
phone output over earphones.
1.
X
If the watch is connected with a phone,
press any button to terminate the
connection.
30
30
DisconnectedConnected
2.
X
Hold down (C) for about 2 seconds.
This will cause the watch to enter the
Timekeeping Mode.
3.
X
Hold down (B) for about 3.5 seconds
until the second hand points to
e
.
A connection will be established between
the watch and phone, and then the
phone’s ringtone will sound.
●
It will take a few seconds before the
phone tone sounds.
4.
X
Press any button to stop the tone.
●
You can press any watch button to stop
the phone tone, but only during the first
30 seconds after it starts to sound.
Configuring Watch Settings
You can use G-SHOCK Connected to specify
the amount of time until the Bluetooth
connection is automatically terminated, and to
configure other watch settings.
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (C) for about four seconds.
This causes the second hand to move to
e
and establishes a connection between
the watch and phone.
3.
Y
Select the setting you want to change
and then perform the operation shown on
the phone screen.
Changing the Home City
Summer Time Setting
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (C) for about four seconds.
This causes the second hand to move to
e
and establishes a connection between
the watch and phone.
3.
Y
Perform the operation shown on the
phone screen to change your Home City
summer time setting.
Checking the Watch Charge
Level
Use the procedure below to check the current
charge level with G-SHOCK Connected.
1.
Y
Tap the “G-SHOCK Connected” icon.
2.
X
Hold down (C) for about four seconds.
This causes the second hand to move to
e
and establishes a connection between
the watch and phone.
3.
Y
Use G-SHOCK Connected to check the
charge level.
Adjusting Time
Settings Manually
You can use the procedure below to adjust the
watch’s time and day settings when time
calibration signal reception or communication
with a phone is not possible for some reason.
Setting a Home City
Use the procedure in this section to select a
city (time zone) to use as your Home City.
1. Pull out the crown to the second click.
The second hand indicates the currently
selected Home City time zone, while the
mode hand indicates the current summer
time setting.
●
If the Home City setting is a city (time
zone) that cannot be set on the watch,
the second hand will point to .
30
Crown
Summer time setting
Home City
Operation Guide 5544
11
Loading ...
Loading ...
Loading ...