Loading ...
Loading ...
Loading ...
Control Panel/Operation- ZBD7000 & ZBD7100
l) is hw ashe*'
Control
Settings
4. DELAY START--This option will allow you to delay tile start time of any wash cycle except
RINSE ONlY tot up to 6 hours.
• Select the delay start time you want by pressing the DELAY START button. Multiple pressing
will alternate the delay time between 2, 4 or 6 hours and OFK
Start a
Wash Load
To start the dishwasher, open tile dishwasher door so that tile toi>oi=door controls are visible. Tile
last used cycle will be displayed. To begin this cycle, press the START button. To select a dilierent
cycle, press the desired Cycle Selection and Option buttons, and then press the START button.
After the door is closed and latched, the selected cycle will begin.
To haterrupt/pause a cycle, gently open tile door just enough to turn off tile wash inotor. Do not
fillly open the door until the wash action ceases.
_WARNING: Do not flflly open door while tile dishwasher is in operation. Q uickl) ollenino,_ tile
door while the dishwasher is operating could result in serious scalding. Be carefifl
when opening the door; the hot steam that escapes when the door is opened may
cause iI_jmies. Stand back as you open the door and allow the steain to escape.
_AVERTISSEMENT : N'omrez pas compl_tement la porte lorsque la la',euse fonctionne. Une
ouverture rapide de la porte lorsque l'appareil est en timctionnement
peut entrainer de s_rieuses b_ filures. Faites attention lorsque vous ouvrez
la porte; la vapeur brfilante qui s'_chai)pe lots de l'ouverture de la porte
peut causer des blessures. Tenez vous en artiste lorsque vous ouvrez la
porte afin de permettre _'lla vapeur de s'_chai_per.
To restart the wash process, close the door tmtil it locks in place. There may be a time delay of
up to a few minutes because tile temperature inside tile dishwasher needs to stabilize before it
restarts tile wash cycle.
To cancel the cycle after it has started, press and hold tile START/CANCEl, button tin" 3 seconds.
Tile dishwasher will then drain and tile cycle indicator lights will flash. At this point a new wash
cycle can be selected. If a new cycle is not selected, all the Cycle Indicator lights will go out alter
the dishwasher drains. If wm have selected a new wash cycle, remember to add more detergent to
the dete_Nent compartment if required.
15
Loading ...
Loading ...
Loading ...