Loading ...
Loading ...
3
INSTALLATION REQUIREMENTS
Tools Required—All Models
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools
listed here.
Parts Supplied
Check that all parts are included in parts package.
A. Foam seal with adhesive
strip
B. Foam seal without adhesive
strip
C.
3
⁄8" screws x 4 top channel
D. ½" screws x 3 top channel
E.
3
⁄4" screws x 4
F. Sash lock
G. Side curtain bracket x 2
H. Side curtains x 2
I. Top channel
Phillips screwdriver
Tape measure
Scissors
Cordless drill and
1/8" bit
Level
Pencil
Location Requirements—All Models
IMPORTANT: Observe all governing codes and ordinances.
Check the location where the air conditioner will be installed.
Make sure you have everything necessary for correct installation.
The location should provide:
■ Grounded electrical outlet within 6 ft (183 cm) of where the
power cord exits the air conditioner.
NOTE: Do not use an extension cord.
■ Free movement of air in room to be cooled.
■ A large enough opening for the air conditioner. Installation
parts are supplied for double-hung windows.
■ Adequate wall support for weight of air conditioner. Air
conditioner weighs 50 lbs to 75 lbs (22.7 kg to 34 kg).
NOTE: Cabinet louvers must not be obstructed. Air must be able
to pass freely through the cabinet louvers.
A
B
C
D
H
I
G
E
F
Loading ...
Loading ...
Loading ...