Loading ...
Loading ...
Loading ...
3
Table 1-1 Front panel description
No. Icon Description
1
–
Microphone.
2
Press to hang up the incoming call.
Take snapshots during monitoring (only supported by VTH1020J-T).
3
Wake up the screen, and bring up the menu.
For how to operate the menu, see "4 Menu Operations".
4
When someone is calling from the VTO:
Press once to do voice communication with the person.
Press twice quickly to hang up.
5
When someone is calling from the VTO:
Press to talk to the person (only supported by VTH1020J).
Press to take snapshots (only supported by VTH1020J-T).
When no one is calling:
Press once, twice, three times and four times to view live video of: VTO1,
VTO2, analog camera 1 and analog camera 2 respectively.
On any live video, press to take snapshots (only supported by VTH1020J-T).
6
When someone is calling, press to open the door where the VTO is installed.
7 – Power indicator.
8 – LCD screen.
9 – Microphone.
10 – Built-in camera.
11 – Power indicator.
12 –
Call button.
Press once to call the VTH.
Press and hold for 10 seconds to change the bell type of the VTO. The power
indicator will flash.
Press and hold for 15 seconds to turn up the bell volume of the VTO. The
power indicator will flash. When the volume reaches maximum, this step will
set it to minimum. Repeat this step to set appropriate volume.
Press and hold for 20 seconds to change to DWDR (digital wide dynamic
range)/normal mode for the VTO. The power indicator will flash.
13 – Speaker.
Loading ...
Loading ...
Loading ...