Loading ...
Loading ...
Loading ...
3
5) Slide the door downwards and off the top hinge pin. Lift
and remove door, place to side.
6) Remove the two screws from top bracket and transfer to
the other side. You will need to first remove the plastic
caps on the other side.
7) Slide the door back onto the top hinge, be sure the door is
the right way up.
8) Screw the bottom hinge into place on the new side.
9) Place the foot on the other side.
10) Cover the top of door hinge with plastic cover by gently
pushing into position.
11) Check that the door is aligned horizontally and vertically
and that the seals are closed on all sides before final
tightening of the bottom hinge.
12) Adjust the leveling feet as needed.
2.3 Door Space Requirements
The unit's door must be able to open fully as shown.
W×D≥34.65” x 31.5”
2.4 Leveling the Unit
Adjust the two leveling feet at the front of the unit.
If the unit is not leveled, the door and magnetic seal alignments
will not be covered properly.
2.5 Cleaning Before Use
Wipe the inside of the unit with a weak solution of bicarbonate soda. Then wipe with a “wrung-
out” sponge or cloth with warm water. Wash the shelves and salad bin in warm soapy water and
dry completely before replacing in the unit. Clean the exterior of the unit with a damp cloth.
If you require more information refer to the Cleaning section.
W
D
Loading ...
Loading ...
Loading ...