Loading ...
Loading ...
Loading ...
Adjusting scan settings
Adjusting scan settings using XSane or OpenOffice.org
Depending on the application, do either of the following to access the scan options:
• Using XSane
1 Open a terminal window, and then type xsane. Press Enter
2 From the “device detection” dialog, navigate to:
Available devices > select your printer > OK
3 From the “Network:scanner” main dialog, do either of the following:
– Click Window > Show standard options.
– Click Window > Show advanced options.
• Using OpenOffice.org
Note: You may use Writer, Calc, Impress, or Draw only.
1 From an OpenOffice.org application toolbar, do either of the following:
– Click Insert > Picture > Scan > Select Source.
– Click Insert > Graphics > Scan > Select Source.
2 From the “Device Used” menu, select your printer
Navigate to:
Device Used > select your printer.
3 From the “Options” area, select Image Settings or Advanced Settings.
To Select
Select the document type. Content Type or content-type
Select a scan resolution.
or scan-resolution
Resolutions for all the printers are displayed as options. Make
sure the printer supports the the resolution you select.
Note: The icon
is found on the XSane main dialog.
Select a color depth. or mode
Note: The icon
is found on the XSane main dialog.
Select a document size. Original Size or original-size
Document sizes for all the printers are displayed as options.
Make sure the printer supports the size you select.
Perform a duplex scan.
Notes:
• Make sure that the printer has a duplex scanner and an
Automatic Document Feeder (ADF).
• Make sure to place your document in the ADF.
• The duplex scanner and the ADF are available only in
select models.
Scan both sides or scan-both-sides
Scanning
12
Loading ...
Loading ...
Loading ...