Loading ...
Loading ...
ASSEMBLY
1. Align cradle base with the fan support bracket attached to both sides of the fan
2. Insert the support bracket into the opening of the cradle base. Press the spring loaded button down to allow it to
Insert into the cradle base (refer to Fig 1)
3. Press the support bracket into the cradle base until the spring button protrudes and ‘locks’ into position
(Refer to Fig 2)
4. Repeat the above 3 steps for the other side of the fan
Fig 1 Fig 2
2
WARNINGS
Shock Hazzard- Use the fan only in dry environments. This fan is not intended for use in a bathroom, laundry
area or similar locations or near sinks, washing machines, swimming pools or other sources of water. Never
locate fan where it may fall into a bathtub or other water receptacle. Do not use in damp environments such as
basements.
Hot Surfaces- Do not touch fan motor when in use. The motor is hot when in use. To avoid burns, do not let bare
skin touch hot surfaces.
Fire hazzard- Fans have arching or sparkling parts inside. Do not use near combustible materials or flammable
gasses or sources of heat. Do not use in areas where gasoline, paint or flammable materials are used or stored.
To prevent a possible fire, do not block air intakes or exhaust in any manner. Do not insert or allow foreign
object to enter any ventilation or exhaust opening as this may cause an electric shock, fire or dame the fan.
Prevent Electric shock- This fan has a three prong grounded plug that must be inserted into a matching
properly grounded outlet to reduce the risk of electrical shock. Do not attempt to defeat this safety feature.
Do not use this fan with any solid-state speed control devices.
Loading ...
Loading ...
Loading ...