HCD1010NHT Operation and Service Manual

Loading ...

24 HCD1010R/N, HMF1010R/N, HCD1410R/N, HMF1410R/N

Evaporator reassembly

Fig. 20

14. Install ceramic mating ring and shaft seal.

Caution: Do not touch the sealed surface of either

part. Oil from bare skin will cause premature seal

failure.

15. Use liquid hand soap on the rubber part of the

ceramic seal when installing in main housing. Use

supplied cardboard disc to press into recess.

16. Apply liquid hand soap to raised area of auger

shaft and interior rubber portion of shaft seal before

installing seal.

1 7. Clean O ring groove. Lubricate O ring with petrol-gel

and reinstall.

Cardboard

disc

Do NOT

touch!

Fig. 21

18. Carefully install auger.

19. Rotate auger to position shown to clear main housing

stream divider.

Fig. 22

20. Install rear shuttle insulation (Fig. 22.1) and slide

main housing (Fig. 22.2) onto auger.

2 1. When installing new water seal, use screwdriver to

compress the spring (Fig. 22.3), which allows for

easier installation of the three screws.

Loading ...

Follett HCD1010NHT 23" Horizon Elite Series Remote Condenser Ice Machine