Loading ...
Loading ...
Loading ...
5
5. The Kettle will automatically switch off to the “O” position once the water has
boiled. The indicator Blue LED light inside the Kettle will turn off.
Note: The switch only works when the Kettle body is correctly placed on base unit.
6. Lift the Kettle from the base using its handle and pour out your hot water into your
container.
Note: If you need to heat water again, let the appliance rest for 30-60 seconds
before starting again.
7. When heating is complete, make sure the power switch is on the "O" position, and
then unplug the product from the electrical outlet.
WARNING: Always unplug the product from the electrical outlet when it is not in
use or will be left unattended.
Cleaning Your Kettle
WARNING: Always unplug the product and allow it to cool before cleaning or storing.
NOTICE: To avoid damaging the product, do not pour cold water into the Appliance
after use and do not use abrasive cleaners/pads to clean any part of the product.
• Make sure the Kettle is empty and has had time to cool before handling it.
• Do not run any part of this appliance in the Dishwasher.
• Remove Kettle from base and clean with a non-abrasive cleaner and warm soapy
water.
• Base should only be cleaned with a soft damp towel and dried before storing. DO NOT
USE RUNNING WATER.
• Dry all parts thoroughly before storing or using again.
Descaling Your Kettle
WARNING: Always unplug the product before any cleaning. Dry all parts after every use.
Descale your kettle regularly to avoid tougher stains.
Descaling: Descaling is the removal of mineral deposits from stainless steel. All water
contains minerals including purified and filtered water. After your kettles first use you
may see the first signs of deposits which may be white to reddish brown in color. These
stains are not rust nor are they toxic.
Note: Reheating tea in your kettle may discolor or stain the stainless-steel surface at the
base of the kettle.
To descale your kettle, fill a kettle full of water, add a small amount of white vinegar,
and boil. Unplug the kettle and allow the solution to sit for an hour. For darker stains
leave overnight. This will remove most deposits that have builtup from normal use.
Rinse out solution, add fresh water, and boil again. Allow to cool, follow with thorough
cleaning, and dry before next use.
Loading ...
Loading ...
Loading ...