Loading ...
Loading ...
Loading ...
8
Mainnce & Care
Clearing clogs from the dirt cup
1. Unplug the vacuum from electrical outlet.
2. Remove the dirt cup from the vacuum,
following steps 1-3 of Emptying the dirt cup
on page 6.
3. Remove the dirt cup filter assembly from
the dirt cup, following step 2 of Clean the dirt
cup filter on page 6.
4. Tap the dirt cup filter assembly over a
garbage container to remove any dirt or debris
from the cyclone screen that surrounds the dirt
cup filter.
5. Reach up into the dirt cup to clear any dirt
or debris from the dirt cup.
6. Check to see if there are any clogs
in the suction inlet.
7. After clearing any dirt or debris from the dirt
cup, replace the dirt cup filter assembly back
in the dirt cup following step 8 of Cleaning the
dirt cup filter on page 6.
Removing debris from turbine hard floor tool
1. Use coin or flathead screwdriver to release the
lock on the bottom of the tool to release the soft
dusting brush.
2. Return the brush and replace the locking
mechanism when completed.
www.BISSELL.com
1. 2.
Loading ...
Loading ...
Loading ...