Loading ...
Loading ...
Loading ...
13
When chopping is complete, unplug and
press the EasyClick Plus release buttons
(3) to detach the motor part.
Lift the lid up. Carefully take out the blade
before pouring out the contents of the
bowl. To remove the blade slightly turn it
then pull it o.
Caution
Do not use the chopper accessories
(10/11/12) with chopping blades to
process extremely hard foods, such as
unshelled nuts, ice cubes, coee beans,
grains, or hard spices e.g. nutmeg.
Processing these foods could damage
the blades.
If using the appliance to puree hot food
ensure the liquid is not boiling. Allow
hot food to cool slightly to avoid risk of
scalding.
Never place the chopper bowls in the
microwave oven.
Food Processor Accessory
The food processor accessory (10) can be
used for:
Chopping, blending and mixing light
batter;
slicing, shredding and making French
fries.
Chopping (D)
Using the blade (10h) you can chop meat,
hard cheese, onions, herbs, garlic, vegeta-
bles, bread, crackers, and nuts.
For processing liquids the quantity should
not exceed 1/2 of working bowl. For best
results of hard food processing fill the con-
tainer with max. 700 g (24.5 oz).
Refer to the Processing Guide D for maxi-
mum quantities and recommended speeds.
Before Use
Pre-cut foods into small pieces for easier
chopping.
Remove any bones, cartilage, tendons
and gristle from meat to help prevent
damage to the blades.
Remove stems from herbs, shell nuts.
Make sure the anti-slip rubber ring (10g)
is attached to the bottom of the food
processor bowl.
Assembly and Operation
Carefully remove the plastic cover from
the blade.
The blade (10h) is very sharp! Always hold
it by the upper plastic part and handle it
carefully.
Place the blade on the center pin of the
bowl (10f). Press it down and give it a turn
so that it locks into place.
Fill the bowl with food. Attach the lid (10a)
to the bowl with the latch (10e) positioned
to the right of the bowl handle and align
with marks.
To lock the lid, turn it clockwise so that
the latch engages with a click.
Insert the motor part (2) into the coupling
(10b) until it locks.
Plug in the appliance and insert the push-
er (10c) in the feed tube (10d).
To operate the food processor, switch on
the appliance. During processing, hold
the motor part with one hand and the
food processor bowl on the handle.
When chopping is complete, unplug and
press the EasyClick Plus release buttons
(3) to detach the motor part.
Press the lid latch (10e) and hold it. Turn
the lid (10a) counter-clockwise to unlatch
it.
Lift the lid up. Carefully take out the blade
before pouring out the contents of the
bowl. To remove and unlock the blade,
slightly turn it then pull it o.
Caution
Do not use the food processor accessory
to chop extremely hard foods, such as
unshelled nuts, ice cubes, coee beans,
grains or hard spices e.g. nutmeg. Pro-
cessing these foods could damage the
blades.
Never place the food processor bowl in
the microwave oven.
5722113784_HB701-MQ7025-MQ7077x_USCA__V08.indd 13 04.11.19 10:24
Loading ...
Loading ...
Loading ...