Operation Guide 3465
E-9
Timekeeping
Use the Timekeeping Mode to set and view the current
time and date.
Read this before you set the time and date !
The times displayed in the Timekeeping Mode and World
Time Mode are linked. Because of this, make sure you
select a city code for your Home City (the city where you
normally use the watch) before you set the time and date.
x To view the current Home City code setting, press A
while in the Timekeeping Mode.
x For full information on city codes, see the “City Code
Table” at the back of this manual.
Day of week
Seconds
Hour : Minutes
PM indicator
Day
E-8
Auto Return Features
x If you leave the watch in the Alarm Mode for two or three minutes without
performing any operation, it automatically changes to the Timekeeping Mode.
x If you leave a screen with flashing digits or a cursor on the display for two or three
minutes without performing any operation, the watch automatically saves any
settings you have made up to that point and exits the setting screen.
Scrolling
The B and D buttons are used in various modes and setting screens to scroll
through data on the display. In most cases, holding down these buttons during a
scroll operation scrolls at high speed.
Initial Screens
When you enter the World Time or Alarm Mode, the data you were viewing when
you last exited the mode appears first.
E-7
Countdown Timer Mode
C
Alarm Mode Stopwatch Mode
C
C
E-6
General Guide
x Press C to change from mode to mode.
x In any mode, press B to illuminate the display.
Timekeeping Mode
World Time Mode
C C
E-5E-4
Operating Precautions ..................................................................................... E-32
User Maintenance ............................................................................................ E-42
E-3
Countdown Timer............................................................................................. E-19
To use the countdown timer ......................................................................... E-19
To set the countdown start time ................................................................... E-20
Alarms ............................................................................................................... E-21
To set an alarm time ..................................................................................... E-22
To test the alarm ........................................................................................... E-23
To turn an alarm on and off .......................................................................... E-24
To turn the Hourly Time Signal on and off .................................................... E-25
Illumination ....................................................................................................... E-26
To illuminate the display ............................................................................... E-27
To specify the illumination duration .............................................................. E-27
Other Settings .................................................................................................. E-28
To turn the button operation tone on and off ................................................ E-28
Specifications ................................................................................................... E-30
E-2
Contents
About This Manual ............................................................................................. E-1
General Guide ..................................................................................................... E-6
Timekeeping ....................................................................................................... E-9
To set the time and date ............................................................................... E-10
To toggle the Timekeeping Mode time between DST and Standard Time .... E-13
World Time ....................................................................................................... E-14
To view the time in another city code ........................................................... E-14
To toggle a city code time
between Standard Time and Daylight Saving Time ................................... E-15
Stopwatch ......................................................................................................... E-17
To measure times with the stopwatch .......................................................... E-18
E-1
About This Manual
x Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
x Button operations are indicated using the letters shown
in the illustration.
x Note that the product illustrations in this manual are
intended for reference only, and so the actual product
may appear somewhat different than depicted by an
illustration.
E
ENGLISH
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is
designed, carefully read and follow the instructions in this manual, especially the
information under “Operating Precautions” and “User Maintenance”.
MA1810-EA
©
2018 CASIO COMPUTER CO., LTD.
Operation Guide 3465
E-19
Countdown Timer
The countdown timer can be set within a range of
one minute to 24 hours. An alarm sounds when the
countdown reaches zero.
x The countdown operation continues even if you exit the
Countdown Timer Mode.
x All of the operations in this section are performed in the
Countdown Timer Mode, which you enter by pressing
C (page E-7).
To use the countdown timer
Press D while in the Countdown Timer Mode to start the countdown timer.
x When the end of the countdown is reached, the alarm sounds for 10 seconds or
until you stop it by pressing any button. The countdown time is automatically reset
to its starting value after the alarm stops.
Minutes
Hours Seconds
E-18
To measure times with the stopwatch
Elapsed Time
D
D D D A
Start Stop Resume Stop Reset
Split Time
D
A A D A
Start Split
(SPL displayed)
Split release Stop Reset
Two Finishes
D
A D A A
Start Split
First runner
finishes.
Display time of
first runner.
Stop
Second runner
finishes.
Split release
Display time of
second runner.
Reset
E-17
Stopwatch
The stopwatch lets you measure elapsed time, split
times, and two finishes.
x The display range of the stopwatch is 59 minutes,
59.99seconds.
x The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
x The stopwatch measurement operation continues even if
you exit the Stopwatch Mode.
x Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to
elapsed time measurement.
x All of the operations in this section are performed in the Stopwatch Mode, which
you enter by pressing C (page E-7).
Seconds
Minutes
1/100 seconds
E-16
Note
x The seconds count of the World Time is synchronized with the seconds count of
the Timekeeping Mode.
x All World Time Mode times are calculated from the current Home City time in the
Timekeeping Mode using UTC time differential values.
x The UTC differential is a value that indicates the time difference between a
reference point in Greenwich, England and the time zone where a city is located.
x The letters “UTC” is the abbreviation for “Coordinated Universal Time”, which is the
world-wide scientific standard of timekeeping. It is based upon carefully maintained
atomic (cesium) clocks that keep time accurately to within microseconds. Leap
seconds are added or subtracted as necessary to keep UTC in sync with the
Earth’s rotation.
E-15
To toggle a city code time between Standard Time and Daylight Saving Time
1. In the World Time Mode, use D to display the city
code (time zone) whose Standard Time/Daylight Saving
Time setting you want to change.
2. Hold down A for about one second to toggle between
Daylight Saving Time (DST indicator displayed) and
Standard Time (DST indicator not displayed).
x The DST indicator is on the display whenever you display
a city code for which Daylight Saving Time is turned on.
x Note that the DST/Standard Time setting affects only
the currently displayed city code. Other city codes are
not affected.
x In the World Time Mode, you can switch the city code you currently have selected
as your Timekeeping Mode Home City between Standard Time and DST. The
setting you select in the World Time Mode will also be applied in the Timekeeping
Mode.
DST indicator
E-14
World Time
World Time shows the current time in 48 cities (29 time
zones) around the world.
x All of the operations in this section are performed in
the World Time Mode, which you enter by pressing C
(page E-6).
To view the time in another city code
In the World Time Mode, press D to scroll through the
available city codes. Holding down the button scrolls at
high speed.
x For full information about city codes, see the “City Code
Table” at the back of this manual.
x If the current time shown for a city is wrong, check your
Timekeeping Mode time and Home City code settings
and make the necessary changes.
City code
Current time in the zone of
the selected city code
E-13
Daylight Saving Time (DST)
Daylight Saving Time (summer time) advances the time setting by one hour from
Standard Time. Remember that not all countries or even local areas use Daylight
Saving Time.
To toggle the Timekeeping Mode time between DST and Standard Time
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C twice to display the DST setting screen.
3. Press D to toggle between Daylight Saving Time (On)
and Standard Time (OF).
4. Press A to exit the setting screen.
x The DST indicator is displayed on the Timekeeping
Mode and Alarm Mode screen while Daylight Saving
Time is turned on.
DST indicator
On/Off status
E-12
4. Press A to exit the setting screen.
x Resetting the seconds to 00 while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to 00 without changing the minutes.
x With the 12-hour format, the P (PM) indicator appears to the left of the hour digits
for times in the range of noon to 11:59 p.m. and no indicator appears to the left of
the hour digits for times in the range of midnight to 11:59 a.m.
x With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
any indicator.
x The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is
applied in all modes.
x The year can be set in the range of 2000 to 2099.
x The watch’s built-in full automatic calendar makes allowances for different month
lengths and leap years. Once you set the date, there should be no reason to
change it except after you have the watch’s battery replaced.
x The day of the week is automatically displayed in accordance with the date (year,
month, and day) settings.
E-11
3. When the setting you want to change is flashing, use D and B to change it as
described below.
Screen To do this: Do this:
Reset the seconds to 00
Press D.
Change the city code
Use D (east) and B (west).
Toggle between Daylight Saving Time (On)
and Standard Time (OF)
Press D.
Change the hour or minutes
Use D (+) and B (–).
Toggle between 12-hour (12H) and 24-hour
(24H) timekeeping
Press D.
Change the year, month, or day
Use D (+) and B (–).
x See “Daylight Saving Time (DST)” (page E-13) for details about the DST setting.
E-10
To set the time and date
1. In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select other settings.
Seconds
MinutesHourDSTCity Code
Day 12/24-Hour FormatYearMonth
CCC
CCC
C C
C
Operation Guide 3465
E-29
x Holding down C to turn the button operation tone on or off also causes the
watch’s current mode to change.
x The Mute indicator is displayed in all modes when the button operation tone is
turned off.
E-28
Other Settings
Button Operation Tone
The button operation tone sounds any time you press
one of the watch’s buttons. You can turn the button
operation tone on or off as desired.
x Even if you turn off the button operation tone, the alarm,
Hourly Time Signal, and Countdown Timer Mode alarm
all operate normally.
To turn the button operation tone on and off
In any mode (except when a setting screen is on the
display), hold down C to toggle the button operation
tone on (Mute indicator not displayed) and off (Mute
indicator displayed).
Mute indicator
E-27
To illuminate the display
In any mode, press B to turn on illumination.
x You can use the procedure below to select either 1.5 seconds or 3 seconds as the
illumination duration. When you press B, the illumination will remain on for about
1.5 seconds or 3 seconds, depending on the current illumination duration setting.
To specify the illumination duration
1.
In the Timekeeping Mode, hold down A until the
seconds start to flash, which indicates the setting
screen.
2. While the seconds are flashing, press B to toggle
the illumination duration between 1.5 seconds (
) and
3seconds (
).
3. Press A to exit the setting screen.
E-26
Illumination
This watch has an EL (electro-luminescent) panel that
causes the entire display to glow for easy reading in the
dark.
Illumination Precautions
x The electro-luminescent panel that provides illumination
loses power after very long use.
x Illumination may be hard to see when viewed under
direct sunlight.
x The watch may emit an audible sound whenever the
display is illuminated. This is due to vibration of the
EL panel used for illumination, and does not indicate
malfunction.
x Illumination automatically turns off whenever an alarm
sounds.
x Frequent use of illumination runs down the battery.
E-25
To turn the Hourly Time Signal on and off
1. In the Alarm Mode, use D to select the Hourly Time
Signal (SIG).
2. Press A to toggle it on (On displayed) and off (OF
displayed).
x The Hourly Time Signal on indicator is shown on the
display in all modes while the Hourly Time Signal is
turned on.
Hourly time signal
on indicator
On/Off status
E-24
To turn an alarm on and off
1. In the Alarm Mode, use D to select an alarm.
2. Press A to toggle it on (On displayed) and off (OF
displayed).
x Turning on an alarm (AL-1, AL-2, AL-3, AL-4 or SNZ)
displays the alarm on indicator on its Alarm Mode
screen.
x In all modes, the alarm on indicator is shown for any
alarm that is currently turned on.
x The alarm on indicator flashes while the alarm is
sounding.
x The snooze alarm indicator flashes during the 5-minute
intervals between alarms.
Snooze alarm
indicator
Alarm on indicator
On/Off status
E-23
3. Press C to move the flashing between the hour and minute settings.
4. While a setting is flashing, use D (+) and B (–) to change it.
x When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. (indicator not displayed) or p.m. (P indicator).
5. Press A to exit the setting screen.
Alarm Operation
The alarm sounds at the preset time for about 10 seconds, regardless of the mode
the watch is in. In the case of the snooze alarm, the alarm operation is performed a
total of seven times, every five minutes, or until you turn the alarm off (page E-24).
x To stop the alarm tone after it starts to sound, press any button.
x Performing any one of the following operations during a 5-minute interval between
snooze alarms cancels the current snooze alarm operation.
Displaying the Timekeeping Mode setting screen (page E-10)
Displaying the snooze alarm setting screen (page E-22)
To test the alarm
In the Alarm Mode, hold down D to sound the alarm.
E-22
To set an alarm time
1. In the Alarm Mode, use D to scroll through the alarm
screens until the one whose time you want to set is
displayed.
AL-1
SIG
AL-3
AL-4
AL-2
SNZ
DDD
DDD
x To set an alarm time, display the applicable alarm screen (AL-1 through AL-4,
or SNZ).
x The snooze alarm operation repeats every five minutes.
2. After you select an alarm, hold down A until the hour setting of the alarm time
starts to flash, which indicates the setting screen.
x This operation turns on the alarm automatically.
E-21
Alarms
The Alarm Mode gives you a choice of five daily alarms,
one of which is a snooze alarm. Also use the Alarm Mode
to turn the Hourly Time Signal (SIG) on and off.
x The snooze alarm screen is indicated by SNZ, while the
other alarm screens are numbered AL-1
through AL-4.
The Hourly Time Signal screen is indicated by SIG.
x All of the operations in this section are performed in
the Alarm Mode, which you enter by pressing C (page
E-7).
Alarm number
On/Off status
Alarm time
(Hour : Minutes)
E-20
x Press D while a countdown operation is in progress to pause it. Press D again to
resume the countdown.
x To completely stop a countdown operation, first pause it (by pressing D), and
then press A. This returns the countdown time to its starting value.
To set the countdown start time
1.
In the Countdown Timer Mode, hold down A until the
hours of the countdown start time start to flash, which
indicates the setting screen.
2. Press C to move the flashing between the hours and
minutes.
3. While a setting is flashing, use D (+) or B (–) to
change it.
x To set the starting value of the countdown time to 24
hours, set 0:00.
4. Press A to exit the setting screen.
Operation Guide 3465
E-39
x Leaving your watch wet for long periods can cause fluorescent color to fade. Wipe
the watch dry as soon as possible after it becomes wet.
x Semi-transparent resin parts can become discolored due to sweat and dirt, and if
exposed to high temperatures and humidity for long periods.
x Daily use and long-term storage of your watch can lead to deterioration, breaking,
or bending of resin components. The extent of such damage depends on usage
conditions and storage conditions.
Leather Band
x Allowing your watch to remain in contact with other items or storing it together with
other items for long periods while it is wet can cause the color of the leather band
to transfer to the other items or the color of the other items to transfer to the leather
band. Be sure to dry off your watch thoroughly with a soft cloth before storing it
and make sure it is not in contact with other items.
E-38
Storage
x If you do not plan to use your watch for a long time, thoroughly wipe it free of all
dirt, sweat, and moisture, and store it in a cool, dry place.
Resin Components
x Allowing your watch to remain in contact with other items or storing it together with
other items for long periods while it is wet can cause color on resin components
to transfer to the other items, or the color of the other items to transfer to the resin
components of your watch. Be sure to dry off your watch thoroughly before storing
it and make sure it is not in contact with other items.
x Leaving your watch where it is exposed to direct sunlight (ultraviolet rays) for long
periods or failure to clean dirt from your watch for long periods can cause it to
become discolored.
x Friction caused by certain conditions (strong external force, sustained rubbing,
impact, etc.) can cause discoloration of painted components.
x If there are printed figures on the band, strong rubbing of the printed area can
cause discoloration.
E-37
Magnetism
x Though a digital watch normally is not affected by magnetism, very strong
magnetism (from medical equipment, etc.) should be avoided because it can cause
malfunction and damage to electronic components.
Electrostatic Charge
x Exposure to very strong electrostatic charge can cause your watch to display
the wrong time. Very strong electrostatic charge even can damage electronic
components.
x Electrostatic charge can cause the display to go blank momentarily or cause a
rainbow effect on the display.
Chemicals
x Do not allow your watch to come into contact with thinner, gasoline, solvents,
oils, or fats, or with any cleaners, adhesives, paints, medicines, or cosmetics that
contain such ingredients. Doing so can cause discoloration of or damage to the
resin case, resin band, leather, and other parts.
E-36
Temperature
x Never leave your watch on the dashboard of a car, near a heater, or in any other
location that is subject to very high temperatures. Do not leave your watch where
it will be exposed to very low temperatures. Temperature extremes can cause your
watch to lose or gain time, to stop, or otherwise malfunction.
x Leaving your watch in an area hotter than +60°C (140°F) for long periods can lead
to problems with its LCD. The LCD may become difficult to read at temperatures
lower than 0°C (32°F) and greater than +40°C (104°F).
Impact
x Your watch is designed to withstand impact incurred during normal daily use and
during light activity such as playing catch, tennis, etc. Dropping your watch or
otherwise subjecting it to strong impact, however, can lead to malfunction. Note
that watches with shock-resistant designs (G-SHOCK, BABY-G, G-MS) can be
worn while operating a chain saw or engaging in other activities that generate
strong vibration, or while engaging in strenuous sports activities (motocross, etc.)
E-35
Band
x Tightening the band too tightly can cause you to sweat and make it difficult for air
to pass under the band, which can lead to skin irritation. Do not fasten the band too
tightly. There should be enough room between the band and your wrist so you can
insert your finger.
x Deterioration, rust, and other conditions can cause the band to break or come off
of your watch, which in turn can cause band pins to fly out of position or to fall out.
This creates the risk of your watch falling from your wrist and becoming lost, and
also creates the risk of personal injury. Always take good care of your band and
keep it clean.
x Immediately stop using a band if you even notice any of the following: loss of band
flexibility, band cracks, band discoloration, band looseness, band connecting
pin flying or falling out, or any other abnormality. Take your watch to your original
retailer or to a CASIO service center for inspection and repair (for which you will be
charged) or to have the band replaced (for which you will be charged).
E-34
x A trained technician will inspect your watch for proper water resistance whenever
you have its battery replaced. Battery replacement requires the use of special tools.
Always request battery replacement from your original retailer or from an authorized
CASIO service center.
x Some water-resistant watches come with fashionable leather bands. Avoid
swimming, washing, or any other activity that causes direct exposure of a leather
band to water.
x The inside surface of the watch glass may fog when the watch is exposed to a
sudden drop in temperature. No problem is indicated if the fogging clears up
relatively quickly. Sudden and extreme temperature changes (such as coming into
an air conditioned room in the summer and standing close to an air conditioner
outlet, or leaving a heated room in the winter and allowing your watch to come into
contact with snow) can cause it to take longer for glass fogging to clear up. If glass
fogging does not clear up or if you notice moisture inside of the glass, immediately
stop using your watch and take it to your original retailer or to an authorized CASIO
service center.
x Your water-resistant watch has been tested in accordance with International
Organization for Standardization regulations.
E-33
x Watches that do not have WATER RESIST or WATER RESISTANT marked on
the back cover are not protected against the effects of sweat. Avoid using such
a watch under conditions where it will be exposed to large amounts of sweat or
moisture, or to direct splashing with water.
x Even if a watch is water resistant, note the usage precautions described below.
Such types of use reduce water resistance performance and can cause fogging of
the glass.
− Do not operate the crown or buttons while your watch is submersed in water or
wet.
− Avoid wearing your watch while in the bath.
− Do not wear your watch while in a heated swimming pool, sauna, or any other
high temperature/high humidity environment.
− Do not wear your watch while washing your hands or face, while doing
housework, or while performing any other task that involves soaps or detergents.
x After submersion in seawater, use plain water to rinse all salt and dirt from your
watch.
x To maintain water resistance, have the gaskets of your watch replaced periodically
(about once every two or three years).
E-32
Operating Precautions
Water Resistance
x The information below applies to watches with WATER RESIST or WATER
RESISTANT marked on the back cover.
Water
Resistance
Under Daily
Use
Enhanced Water Resistance Under
Daily Use
5
Atmospheres
10
Atmospheres
20
Atmospheres
Marking
On watch front or on
back cover
No
BAR mark
5BAR 10BAR 20BAR
Example of
Daily Use
Hand washing, rain Yes Yes Yes Yes
Water-related work, swimming
No Yes Yes Yes
Windsurfing No No Yes Yes
Skin diving No No Yes Yes
x
Do not use your watch for scuba diving or other types of diving that requires air tanks.
OPUM-E
E-31
Countdown Timer
Measuring unit: 1 second
Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments)
Time up alert duration: 10 seconds
Alarms: 5 daily alarms (with 1 snooze alarm); Hourly Time Signal
Illumination: EL Backlight (electro-luminescent panel); Selectable illumination
duration
Other: Button operation tone on/off
Battery: One lithium battery (Type: CR2025)
Approximately 5 years on type CR2025 (assuming alarm operation 10 seconds
per day, and one illumination operation 1.5 seconds per day)
Frequent use of illumination can shorten battery operating time.
Specifications are subject to change without notice.
E-30
Specifications
Accuracy at normal temperature: ±15 seconds a month
Timekeeping: Hour, minutes, seconds, a.m./p.m. (P), day, day of the week
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to
2099
Other: Home City code (can be assigned one of 48 city codes); Daylight Saving
Time (summer time)/Standard Time
World Time: 48 cities (29 time zones)
Other: Daylight Saving Time/Standard Time
Stopwatch
Measuring unit: 1/100 seconds
Measuring capacity: 59'59.99"
Measuring modes: Elapsed time, split time, two finishes
Operation Guide 3465
E-46
Low Battery Power
x Low battery power is indicated by large timekeeping error, by dim display contents,
or by a blank display.
x Operation while battery power is low can result in malfunction. Replace the battery
as soon as possible.
E-45
x When replacing the battery, also request a check for proper water resistance.
x Ornamental resin components may become worn, cracked, or bent over
time when subjected to normal daily use. Note that if cracking or any other
abnormality indicating possible damage is noticed in a watch submitted for battery
replacement, your watch will be returned with an explanation of the abnormality,
without the requested servicing being performed.
Initial Battery
x The battery that comes loaded in your watch when you purchase it is used for
function and performance testing at the factory.
x The test battery may go dead quicker than the normally rated battery life as noted
in the User’s Guide. Note that you will be charged for replacement of this battery,
even if replacement is required within your watch’s warranty period.
E-44
x Even if the surface of the metal appears clean, sweat and rust in crevasses can
soil the sleeves of clothing, cause skin irritation, and even interfere with watch
performance.
Premature Wear
x Leaving sweat or water on a resin band or bezel, or storing your watch an area
subject to high moisture can lead to premature wear, cuts, and breaks.
Skin Irritation
x Individuals with sensitive skin or in poor physical condition may experience skin
irritation when wearing a watch. Such individuals should keep their leather band
or resin band particularly clean. Should you ever experience a rash or other skin
irritation, immediately remove your watch and contact a skin care professional.
Battery Replacement
x Leave battery replacement up to your original retailer or authorized CASIO service
center.
x Have the battery replaced only with the type specified in the User’s Guide. Use of a
different battery type can cause malfunction.
E-43
x Clean water and sweat from a leather band by wiping with a soft cloth.
x Not operating a watch crown, buttons, or rotary bezel could lead to later problems
with their operation. Periodically rotate the crown and rotary bezel, and press
buttons to maintain proper operation.
Dangers of Poor Watch Care
Rust
x Though the metal steel used for your watch is highly rust-resistant, rust can form if
your watch is not cleaned after it becomes dirty.
− Dirt on your watch can make it impossible for oxygen to come into contact with
the metal, which can lead to breakdown of the oxidization layer on the metal
surface and the formation of rust.
x Rust can cause sharp areas on metal components and can cause band pins to fly
out of position or to fall out. If you ever notice any abnormality immediately stop
using your watch and take it to your original retailer or to an authorized CASIO
service center.
E-42
User Maintenance
Caring for Your Watch
Remember that you wear your watch next to your skin, just like a piece of clothing.
To ensure your watch performs at the level for which it is designed, keep it clean by
frequently wiping with a soft cloth to keep your watch and band free of dirt, sweat,
water and other foreign matter.
x Whenever your watch is exposed to sea water or mud, rinse it off with clean fresh
water.
x For a metal band or a resin band with metal parts, use a soft toothbrush or similar
tool to scrub the band with a weak solution of water and a mild neutral detergent,
or with soapy water. Next, rinse with water to remove all remaining detergent and
then wipe dry with a soft absorbent cloth. When washing the band, wrap the watch
case with kitchen plastic wrap so it does not come into contact with the detergent
or soap.
x For a resin band, wash with water and then wipe dry with a soft cloth. Note that
sometimes a smudge like pattern may appear on the surface of a resin band. This
will not have any effect on your skin or clothing. Wipe with a cloth to remove the
smudge pattern.
E-41
Bacteria and Odor Resistant Band
x The bacteria and odor resistant band protects against odor generated by the
formation of bacteria from sweat, which ensures comfort and hygiene. In order
to ensure maximum bacteria and odor resistance, keep the band clean. Use an
absorbent soft cloth to thoroughly wipe the band clean of dirt, sweat, and moisture.
A bacteria and odor resistant band suppresses the formation of organisms and
bacteria. It does not protect against rash due to allergic reaction, etc.
Liquid Crystal Display
x Display figures may be difficult to read when viewed from an angle.
Note that CASIO COMPUTER CO., LTD. assumes no responsibility for any damage
or loss suffered by you or any third party arising through the use of your watch or
its malfunction.
E-40
x Leaving a leather band where it is exposed to direct sunlight (ultraviolet rays) for
long periods or failure to clean dirt from a leather band for long periods can cause
it to become discolored.
CAUTION: Exposing a leather band to rubbing or dirt can cause color transfer and
discoloration.
Metal Components
x Failure to clean dirt from metal components can lead to formation of rust, even if
components are stainless steel or plated. If metal components exposed to sweat or
water, wipe thoroughly with a soft, absorbent cloth and then place the watch in a
well-ventilated location to dry.
x Use a soft toothbrush or similar tool to scrub the metal with a weak solution of
water and a mild neutral detergent, or with soapy water. Next, rinse with water
to remove all remaining detergent and then wipe dry with a soft absorbent cloth.
When washing metal components, wrap the watch case with kitchen plastic wrap
so it does not come into contact with the detergent or soap.
L-1
City Code Table
City
Code
City
UTC Offset/
GMT Differential
PPG Pago Pago –11
HNL Honolulu –10
ANC Anchorage –9
YVR Vancouver
–8SFO San Francisco
LAX Los Angeles
DEN Denver –7
MEX Mexico City
–6
CHI Chicago
MIA Miami
–5
NYC New York
CCS Caracas –4
YYT St. Johns –3.5
RIO Rio De Janeiro –3
RAI Praia –1
City
Code
City
UTC Offset/
GMT Differential
LIS Lisbon
0
LON London
BCN Barcelona
+1
PAR Paris
MIL Milan
ROM Rome
BER Berlin
ATH Athens
+2
JNB Johannesburg
IST Istanbul
CAI Cairo
JRS Jerusalem
MOW Moscow
+3
JED Jeddah
THR Tehran +3.5
L
City Code Table
Operation Guide 3465
L-2
City
Code
City
UTC Offset/
GMT Differential
DXB Dubai +4
KBL Kabul +4.5
KHI Karachi
+5
MLE Male
DEL Delhi +5.5
DAC Dhaka +6
RGN Yangon +6.5
BKK Bangkok +7
SIN Singapore
+8HKG Hong Kong
BJS Beijing
SEL Seoul
+9
TYO Tokyo
ADL Adelaide +9.5
City
Code
City
UTC Offset/
GMT Differential
GUM Guam
+10
SYD Sydney
NOU Noumea +11
WLG Wellington +12
x
Based on data as of July 2018.
x
The rules governing global times
(UTC offset and GMT differential) and
summer time are determined by each
individual country.
CASIO COMPUTER CO., LTD.
6-2, Hon-machi 1-chome
Shibuya-ku, Tokyo 151-8543, Japan
