Waldorf RNLB8610G Bold 900mm Gas Range Static Oven Low Back Version

Installation Operation Manual - Page 16

For RNLB8610G.

PDF File Manual, 32 pages, Read Online | Download pdf file

RNLB8610G photo
Loading ...
Loading ...
Loading ...
14
Lighting the Griddle
a. Depress gas control knob and rotate anti-clockwise to PILOT position.
b. Hold gas control knob depressed, press piezo ignition button to ignite pilot burner. Repeat Items
1 to 2 until pilot is lit.
c. Release gas control knob approximately 10-20 seconds after lighting pilot.
d. Pilot should now remain alight - if not, repeat Steps (b. to (c. above.
e. To select Full Flame’, depress and rotate gas control knob anti-clockwise to HIGH position.
f. To select Low Flame’, depress and rotate gas control knob fully anti-clockwise to Low Flame
position.
g. When main burner is not required, depress and turn gas control knob clockwise back to OFF
position.
Turning 'OFF' the Griddle Burner / Pilot
a. To turn 'OFF' griddle, but keep pilot burner alight, rotate gas control knob to 'PILOT' position.
Griddle burner will extinguish and pilot will remain alight.
b. To turn 'OFF' 'PILOT', depress and turn gas control knob clockwise back to OFF position. 'PILOT'
burner will extinguish.
This oven is fitted with a pilot as a standard option and flame
failure protection, which is incorporated by way of a
thermo-electric system for the main burner. Flame failure
protection will shut off gas supply to burner in the event that
pilot burner goes out, so that un-burnt gas is not expelled.
This is an important safety feature which is slowly
becoming law throughout the world
.
1. Open the oven door. Partially depress the thermostat
control knob whilst turning anti-clockwise to the Pilot
position. DO NOT fully depress Control Knob whilst
trying to rotate anti-clockwise as Knob and Gas
Valve will be damaged.
2. With thermostat control knob in Pilotposition, keep knob
depressed whilst pressing piezo igniter button. (Each press
of piezo igniter button will generate a single spark).
3. Hold in thermostat control knob for approx. 10-20 seconds,
then release. Pilot burner should remain alight. (If pilot
does not light, repeat Items 1 to 3 above).
4. View oven pilot burner through holes in front of sole plate
with oven door open.
Pilot Burner
viewing holes
Fig 4
Control Knob in
Pilot Position
Depress and Rotate Knob
Anti-Clockwise to Pilot Position
Piezo Igniter
Button
DO NOT USE aluminium foil or trays directly on cast iron sole plate(s). NEVER block or cover
openings on each side of sole plate(s).
! IMPORTANT
Loading ...
Loading ...
Loading ...