Loading ...
Loading ...
Loading ...
ENGLISH
9
5.
Parts Required:
1 x Chimney Gasket
(#9)
1 x Chimney
(#10)
2 x Screw
(#A)
2 x Washer
(#B)
2 x Locking Washer
(#C)
Installation:
• Locate the chimney opening on the side of the main barrel. From the
outside, secure the chimney and chimney gasket to the side panel using
two screws, locking washers, and washers. The screw will fasten to the pre-
mounted nut on the inside of the barrel.
NOTE: Ensure the chimney cap allows for air to escape.
6. ,
Parts Required:
1 x Side Shelf Handle
(#13)
1 x Serving Tray
(#12)
2 x Serving Tray Handle
(#11)
Installation:
• Remove the four pre-installed screws from the side of the main barrel.
Mount the side shelf handle onto the main barrel using four screws
previously removed.
• Mount serving tray handles to serving tray using the two pre-installed
screws on each handle. Place the serving tray onto the side shelf handle. It
will rest directly on the frame of the side shelf handle.
IMPORTANT: Avoid using the side shelf handle to move or lift the grill.
The weight of the unit will cause the side shelf handle to bend or break,
which is not covered by warranty.
7.
Parts Required:
1 x Bottle Opener
(#7)
Installation:
• Remove the pre-installed screws for the bottle opener. Install the
bottle opener on the hopper.
5
10
9
6
13
12
11
11
7
7
Loading ...
Loading ...
Loading ...