Loading ...
Loading ...
Loading ...
20 ENGLISH
1 2 34 5
► 1. Hex socket bolt 2. Outer ange 3. Saw blade
4. Inner ange 5. Spindle
NOTICE: If the inner ange is removed, be sure to
install it on the spindle with its protrusion facing away
from the blade. If the ange is installed incorrectly, the
ange will rub against the machine.
Return the blade guard and center cover to its original
position. Then tighten the hex bolt clockwise to secure
the center cover. Unlock the stopper pin to release
carriage from the raised position. Lower the handle to
make sure that the blade guard moves properly. Make
sure shaft lock has released spindle before making cut.
Connecting a vacuum cleaner
When you wish to perform clean cutting operation, con-
nect a Makita vacuum cleaner to the dust nozzle using
a front cuff 24 (optional accessory).
1 2
3
1 2
3
► 1. Front cuff 24 2. Hose 3. Vacuum cleaner
Dust bag
The use of the dust bag makes cutting operations clean
and dust collection easy. To attach the dust bag, remove
the dust extraction hose on the tool and connect the
dust bag.
1
2
► 1. Dust extraction hose 2. Dust bag
When the dust bag is about half full, remove the dust
bag from the tool and pull the fastener out. Empty
the dust bag of its contents, tapping it lightly so as to
remove particles adhering to the insides which might
hamper further collection.
1
► 1. Fastener
Loading ...
Loading ...
Loading ...