Loading ...
Loading ...
Loading ...
11
OPERATION
Blade Control
Recoil Starter
Cutting Height
Adjustment Lever
Cutting Height
Adjustment
Lever
Side Discharge
Chute
Drive Control
Mulch Cover
Oil Fill Cap/Dipstick
Figure 12
Blade Control
The blade control is attached to the upper handle of the mower. Depress and
squeeze it against the upper handle to operate the unit. Release it to stop engine
and blade.
WARNING
This blade control is a safety device. Never attempt to bypass its operation.
Drive Control
The drive control is located on the underside of the upper handle and is used to
engage the drive. Squeeze it against the upper handle to engage the drive; release it
to slow down or stop mower from propelling.
Cutting Height Adjustment Lever
One adjustment lever is located on the right rear wheel and one is located on the
right front wheel. Both levers have to be at the same position to ensure a uniform
cut. To adjust the cutting height, refer to the Assembly Section.
Side Discharge Cover
Your mower is shipped as a mulcher. To discharge the grass clippings to the side
instead, follow the instructions in the Assembly section to attach the side discharge
cover.
Mulch Cover
The mulch cover is used for mulching purposes. Instead of collecting the grass
clippings in a grass catcher or using the side discharge chute, some mower models
have the option of recirculating the clippings back to the lawn. This is called
mulching.
WARNING
Keep hands and feet away from the chute area on cutting deck. Refer to
warning label on the unit.
Recoil Starter
The recoil starter is attached to the right upper handle. Stand behind the unit and
pull the recoil starter rope to start the unit.
Oil fill Cap/Dipstick
Refer to the Engine Operator’s Manual packed with your mower for detailed oil
filling, checking and changing instructions.
Meets ANSI Safety Standards
Craftsman Lawn Mowers conform to the safety standard of the American National Standards Institute (ANSI).
Loading ...
Loading ...
Loading ...