Loading ...
Loading ...
Loading ...
7. Select LOAD SiZE
N1ediu_n
LOAD
SiZE
Select the load size setting most suitable for your load. Small
will add a low amount of water for smaller loads and Large will
add the most amount of water for large or bulky loads. Items
need to move freely.
Set FABRIC SOFTENER to ON if you want to add fabric softener.
iMPORTANT," Fabric Softener option must be selected to "On" to
ensure proper distribution at correct time in cycle.
8. Select TEMPERATURE
WASH TEMP
ALL COLD RINSES
Once you select a cycle, select the desired wash temperature
by turning the WASH TEMP knob to the appropriate setting
based on your load. All rinses are tap cold.
NOTE: Always read and follow fabric care label instructions
to avoid damage to your garments.
Wash Temp Suggested Fabrics
Some cold water is added to save :::Whites and pastels :::
energy. This will be cooler than Durable garments ::i
your hot water heater setting.
Heavy soils
Warm
Some cold water will be added, so Bright colors
this will be cooler than what your
Moderate to light soils
previous washer provided.
Cool
Warm water may be added to
Cold
This is the temperature from your
faucet. If your tap cold water is
Colors that bleed
: Dark colors that
::_bleed or fade
very cold, warm water may be Light soils
added to assist in soil removal
and help dissolve detergent.
Close the washer lid and pull out the Cycle knob to start the
washer.
NOTE: Some washers will only fill with the lid in the closed
position.
To add a garment after washer starts:
• Push in the Cycle knob to stop the washer.
Open the lid and add the item(s).
Close the lid and pull the Cycle knob out to resume the
cycle. Do not leave the lid open unattended once the
washer has started filling.
For best performance do not interrupt washer cycle once
the washer has been started.
11
Loading ...
Loading ...
Loading ...