Loading ...
Loading ...
Loading ...
5. Remove the chain drive sprocket (E).
A
B
C
E
D
6. Install a new chain drive sprocket.
To clean the product, the battery and
the battery charger
1. Clean the product with a dry cloth after use.
2. Clean the battery and battery charger with a dry
cloth. Keep the battery guide tracks clean.
3. Make sure that the terminals on the battery and the
battery charger are clean before use.
4. Clean around the oil tank cap with a brush.
5. Clean the inner surface of the protective cover with a
brush.
Troubleshooting
Keypad
Problem Possible faults Possible solution
Green start LED
flashes.
Low battery voltage. Charge the battery.
Red error LED flash-
es.
Overload. The cutting attachment is blocked. stop the
product. Remove the battery. Clean the cut-
ting attachment from unwanted materials.
Loosen the chain.
Temperature deviation. Let the product become cool.
The power trigger and the start button are
pushed at the same time.
Release the power trigger and push the start
button.
The product does not
start.
Dirt in the battery connectors. Clean the battery connectors with com-
pressed air or a soft brush.
Red error LED
comes on.
It is necessary to do servicing on the product. Speak to your servicing dealer.
Battery
LED display
Possible faults Possible action
Green activate LED flashing Low battery voltage. Charge the battery.
Error LED flashing The battery is discharged. Charge the battery.
Temperature deviation. Use the battery in surroundings where tem-
peratures are between -10°C (14°F) and
40°C (104°F).
Error LED is lit Cell difference is too much (1V). Contact your servicing agent.
22 783 - 005 - 23.09.2022
Loading ...
Loading ...
Loading ...