Loading ...
Loading ...
Loading ...
Standard USB menu
Menu item Description
PCL SmartSwitch
On
O
Sets the printer to automatically switch to PCL emulation when a print job
received through a USB port requires it, regardless of the default printer
language
Notes:
• On is the factory default setting.
• When the O setting is used, the printer does not examine incoming data.
• When the
O
setting is used, the printer uses PostScript emulation if the
PS SmartSwitch setting is On. It uses the default printer language
specified in the Setup menu if the PS SmartSwitch setting is O.
PS SmartSwitch
On
O
Sets the printer to automatically switch to PS emulation when a print job
received through a USB port requires it, regardless of the default printer
language
Notes:
• On is the factory default setting.
• When the O setting is used, the printer does not examine incoming data.
• When the O setting is used, the printer uses PCL emulation if the PCL
SmartSwitch setting is On. It uses the default printer language specified in
the Setup menu if the PCL SmartSwitch setting is O.
NPA Mode
On
O
Auto
Sets the printer to perform the special processing required for bidirectional
communication following the conventions defined by the NPA protocol
Notes:
• Auto is the factory default setting.
• Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
USB Buer
Disabled
Auto
3K to <maximum size allowed>
Sets the size of the USB input buer
Notes:
• Auto is the factory default setting.
• The Disabled setting turns o job buering. Any jobs already buered on
the disk are printed before normal processing is resumed.
• The USB buer size value can be changed in 1‑K increments.
• The maximum size allowed depends on the amount of memory in the
printer, the size of the other link buers, and whether the Resource Save
setting is On or O.
• To increase the maximum size range for the USB Buer, disable or
reduce the size of the parallel, serial, and network buers.
• Changing this setting from the printer control panel and then exiting the
menus causes the printer to restart. The menu selection is updated.
Understanding printer menus 116
Loading ...
Loading ...
Loading ...