Loading ...
Loading ...
Loading ...
5
Connect smoke exhaust port to the pipe system you want to
test.
Wait for a while. Pressure gauge value decrease means the
pipe system have leakage; pressure gauge value show "0"
means diameter of leakage point is more than 0.3mm.
•
•
Packing list
Main Unit
Hook (with hand-tighten nuts)
Rubber stopples (with serial specification)
Taper stopple
Taper pipe
30ml oil bottle
User manual
EVAP testing accessory
•
•
•
•
•
•
•
•
Warranty Service
There are 3 years' warranty for AUTOOL product main unit and
1 year warranty for the accessories since the day the customers
have received the product parcel.
Warranty Access
Repair or replace the equipment will be done according to the
specific fault conditions;
We guarantee that all replacement parts, accessories or
equipment are brand new;
•
•
4
Turn on the power switch, and the detector starts to work.
In about 3 minutes, the pipe will be filled with smoke. Check
the leak points. Please use head lamp if necessary.
After leak detection, please connect well the wires and pipe.
•
Notes
•
•
Please do leak detection away from smoke-sensitive parts.
Do not run the detector over 8 minutes. It needs interval rest.
The detector has protector. If it exceeds working limit, it will
power off automatically. In this condition, please operate it
later.
The round part of this detector is with temperature, be careful
to avoid scalding injury.
•
•
•
•
Maintenance
Before filling fresh oil, please pour out the remaining oil in the
detector.
When the smoke output has water drops, please replace with
fresh oil.
Liquid paraffin and baby oil are OK.
•
With longtime high temperature, the smoke and oil will oxidize and
deteriorate. It will infect the service life of smoke generated part, so
please change smoke and oil regularly.
•
•
Please fill fresh oil with equipped oil bottle.
How to do leakage test?
Turn on device then block smoke exhaust port on SDT206,
record pressure gauge value.
•
Loading ...
Loading ...
Loading ...