Loading ...
2 3
ENGLISH
Please read the following instructions before using your new Andis
shaver. Give it the care that a fine precision built instrument
deserves and it will give you years of service.
IMPORTANT SAFEGUARDS
When using an electrical appliance, basic precautions
should always be followed, including the following: Read
all instructions before using the Andis shaver.
DANGER: To reduce the risk of electric shock:
1. Do not reach for an appliance that has fallen into water.
Unplug immediately.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can fall or be
pulled into a tub or sink. Do not place in or drop into
water or other liquid.
4. Always unplug this appliance from the electrical outlet
immediately after using.
5. Unplug this appliance before cleaning, removing, or
assembling parts.
WARNING: To reduce the risk of burns, fire, electric
shock, or injury to persons:
1. An appliance should never be left unattended when plugged
in.
2. Close supervision is necessary when this appliance is used
by, on or near children or individuals with certain
disabilities.
3. Use this appliance only for its intended use as described in
this manual. Do not use attachments not recommended by
Andis.
4. Never operate this appliance if it has a damaged cord or
plug, if it is not working properly, if it has been dropped or
damaged, or dropped into water. Return the appliance to
an Andis Authorized Repair Station for examination or
repair.
5. Keep the cord away from heated surfaces.
6. Never drop or insert any object into any opening.
7. Do not use outdoors or operate where aerosol (spray)
products are being used or where oxygen is being
administered.
8. Do not use this appliance with a damaged or broken foil
or cutter, as injury to the skin may occur.
9. Always attach plug to appliance first, then to outlet.
To disconnect, turn all controls to OFF, then remove plug
from outlet.
SAVE THESE INSTRUCTIONS
THIS PRODUCT INTENDED FOR PROFESSIONAL USE
OPERATING INSTRUCTIONS
CHARGING SHAVER
This battery charger is intended for use with Andis model TS-1 lithium-
ion battery with a rated capacity of 3.7V
2.8 Wh. Remove the shaver
and AC adapter from the carton. Plug the adapter into a 100/240V AC
outlet, or according to your local power standards. Note that the shaver
ON/OFF switch must be in the OFF position for the battery to charge.
Plug the cord adapter directly into the inlet on bottom of shaver
(Figure A). The green charging indicator light on the shaver will turn on.
The shaver has not been charged at the factory. Please charge the
shaver for 2 hours before the first use for maximum performance.
You can keep the shaver plugged into the adapter when not in use. The
adapter will maintain the battery at full charge and the green charging
indicator light will stay on. The adapter should be unplugged if the
shaver won’t be used for seven or more days.
Loading ...
Loading ...
Loading ...