Loading ...
Loading ...
Loading ...
Parameter Description
c. Open command editor on the PC and enter the following
command.
d. Restart the camera.
e. Check the PC command line, if information such as Reply from
192.168.0.125… is displayed, the conguration succeeds, and you
can turn it o then.
f. Enter http://(IP address) in the browser address bar to log in.
NIC
Select the Ethernet card that need to be congured, and the default
one is Wire.
Mode
The mode that the camera gets IP:
●
Static : Congure IP Address, Subnet Mask, and Default Gateway
manually, and then click Save, the login page with the congured
IP address is displayed.
●
DHCP : When there is DHCP server in the network, select DHCP,
and the camera acquires IP address automatically.
MAC Address Displays host MAC address.
IP Version Select IPv4 or IPv6.
IP Address When you select Static in Mode, enter the IP address and subnet
mask that you need.
●
IPv6 does not have subnet mask.
●
The default gateway must be on the same network segment with
the IP address.
Subnet Mask
Default Gateway
Preferred DNS IP address of the preferred DNS.
Alternate DNS IP address of the alternate DNS.
Step 3 Click Apply.
Operation Manual
45
Loading ...
Loading ...
Loading ...