Loading ...
Loading ...
Loading ...
INSTALLATION
7
INSTALLATION
1. STANDARD INSTALLATION
a. Make sure all preparation steps are completed.
b. Determine your ceiling height to see if you need an extension.
i. Hood unit height = 4”
ii. Standard DC height = 18-3/4” (lower) + 18-3/4” (upper)
iii. Minimum height (Standard duct cover only) = 18-3/4”
iv. Maximum height (Standard duct cover only) = 36”
v. (OPTIONAL) Short DC minimum height = 16”
vi. (OPTIONAL) Short DC maximum height = 16”
vii. (OPTIONAL) Long Ext DC Minimum height = 34”
viii. (OPTIONAL) Long Ext DC Maximum height = 58”
ix. Standard Installation = Hood + standard DC
x. Short Installation = Hood + short DC
xi. Long Installation = Hood + long Ext DC
c. Determine the location you want to install the range hood. (Fig. 2a)
d. Prepare ceiling and locate wood support.
e. Mount the unit support frame to the ceiling.
f. Cut a 6” or 7” round opening at the ceiling for ducting pipe.
g. Adjust the support frame to your desired height.
h. Use a spirit level to ensure the balance of the support frame is true.
i. Install ducting through the ceiling.
j. Install the upper duct cover and secure it to the support frame.
k. Slide the lower duct cover up to the upper duct cover and hold in place.
l. Secure the hood from the top by using the (8) screws provided.
m. Connect piping to the outlet of the hood.
n. Installation is complete when hood is securely in place.
Loading ...
Loading ...
Loading ...