Loading ...
Loading ...
Loading ...
3. Push the throttle trigger lockout and make sure that it
goes back to its initial position when you release it.
4. Make sure that the throttle control and throttle trigger
lockout move freely and that the return springs
operate correctly.
5. Start the product and apply full throttle. Refer to
To
start the product on page 14
.
6. Release the throttle control and make sure that the
cutting attachment stops. If the cutting attachment
rotates with the throttle in the idle position, do
a check of the carburetor adjustments. Refer to
Maintenance on page 14
.
To do a check of the stop switch
1. Start the engine.
2. Move the stop switch to the stop position and make
sure that the engine stops.
To do a check of the vibration damping system
The vibration damping system decreases vibration in
the handles to a minimum which makes the operation
easier. The vibration damping system of the product
decreases the transfer of vibration between the engine
unit and the shaft unit of the product.
1. Stop the engine.
2. Do a visual check for deformation and damage for
example, cracks.
3. Make sure you attach the elements of the vibration
damping system correctly.
To do a check of the muffler
The muffler keeps noise levels to a minimum and directs
exhaust fumes away from the operator. In areas with a
hot, dry weather there is a high risk of fire. Obey local
regulations and maintenance instructions
• Do a visual check for damage and deformation.
• Make sure that the muffler is correctly attached to
the product.
712 - 009 - 29.08.2023
7
Loading ...
Loading ...
Loading ...