Loading ...
Loading ...
Loading ...
6
6. Wall Installation
To use your charging station in a wall-mounting installation, first remove the casters and handle.
6.1 Removing Casters and Handle
Warning: Do not attempt to remove casters from the USB charger/hub with any laptops, tablets or other personal electronic devices
inside.
To remove the casters and handle for stationary or wall-mount applications, unscrew the sixteen M6 screws securing the four casters (four per caster)
to the enclosure
A
. If the handle and cord manager are attached to the unit per section 4.1, remove using the included hex key tool to unscrew the
handle’s four (4) hex screws and the cord manager’s eight (8) hex screws from the charging station cabinet
B
.
Note: Save the casters, handle and all hardware for future use.
22”
16”
6.2 Wall-Mounting the Charging Station
For wall mounting, you will need:
• Level
• Appropriate tools for wall mounting
• Appropriate hardware for wall mounting (not included)
Warning: Do not attempt to mount the charging station to the wall with any personal
electronic devices inside.
There are 4 keyhole cutouts on the charging station cabinet’s side panel. Each keyhole can
accommodate an M5 or 3/16” bolt. Each of the keyhole sets are centered 16” apart horizontally
and 22” vertically (see the corresponding model diagram for exact keyhole locations).
Using a level, measure to position your mounting areas precisely. Use appropriate fasteners (not
included) to secure the charging station to the wall. Once the charging station is safely hanging on
the fasteners and secured to the wall, open the unit from the rear door and tighten all mounting
hardware.
Note: The charging station must be installed by a qualified technician. Before mounting, use a level and tape
measure to position your mounting area precisely. Use appropriate fasteners (not included) to secure the
charging station to the wall. Use suitable mounting means when installing to cinder block, concrete, drywall or
wood studs. Warning: The supporting surface must be able to safely support the combined load of the
charging station, equipment stored and all attached hardware and components. Go to the
Specifications section for more information on your model’s weight and dimensions.
BA
Loading ...
Loading ...
Loading ...