Loading ...
Loading ...
Loading ...
en
37
Activating the timestrip® filter
change indicator on the exhaust filter
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters (Fig.
09):
a AirClean
b AirClean Plus50 (light blue)
c Active AirClean50 (black)
d HEPA AirClean50 (white)
If your vacuum cleaner is fitted with ex-
haust filter c or d, you need to activate
the timestrip® filter change indicator.
Press the release catch for the dust
compartment lid and raise the lid as
far as it will go (Fig. 10).
Remove the indicator strip (Fig. 11).
Press the timestrip® filter change in-
dicator(Fig. 12).
After approx. 10–15seconds, a thin red
line will appear in the left-hand side of
the display (Fig. 13).
Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
How the timestrip® filter change in-
dicator works
The timestrip® filter change indicator
shows the remaining functional life of
the exhaust filter. After approx. 50oper-
ating hours the display will be com-
pletely filled with red (Fig. 14). 50oper-
ating hours equates to approximately
one year of use.
Using the supplied accessories
(Fig. 15)
Crevice nozzle
Dusting brush
Upholstery nozzle
Some models are supplied as standard
with one of the following accessories
which are not illustrated.
- AllergoTeQ floorhead
- Turbobrush
These are supplied with their own oper-
ating instructions.
To open the accessories compart-
ment (Fig. 16)
Press the release button on the ac-
cessories compartment lid.
The accessories compartment will then
open.
Take out the accessory you require.
Press down firmly on the lid to close
it.
Use
Adjusting the floorhead
(Fig. 17, 18 + 19)
Depending on the model, your vacuum
cleaner will be fitted as standard with
one of the floorheads illustrated.
This vacuum cleaner can be used for
daily cleaning of carpets, rugs and ro-
bust hard floors.
Loading ...
Loading ...
Loading ...