Loading ...
Loading ...
Loading ...
OPERATION PB-2520
22 X7501190001
© 8/2017 ECHO Inc.
1. Stop Switch
Move stop switch (A) away from
the STOP position.
2. Throttle Position Lever
Move throttle position lever (B)
midway between idle and full
throttle positions.
3. Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line.
4. Recoil Starter
Place the unit on a flat, clear
area. Firmly grasp throttle
handle (D) with left hand and
rapidly pull recoil starter handle/
rope (E) until engine fires.
Recoil starter: Use short pulls - only 1/2 to 2/3 of rope for starting. Do
not allow the rope to snap back in. Always hold the unit firmly.
Note: If engine does not start after 5 pulls, use Cold Start
Procedure.
A
B
C
E
D
Loading ...
Loading ...
Loading ...